Watchmakers Tools

Spring Bar Tool

997 1057

This spring bar tool has one pointed end and one notched end making it perfect for all spring pin jobs. It has a small ruler in the centre in both mm and inch measurements, showing up to 5cm. ... Read More

£4.06 exc. VAT

In Stock

3 Customer Reviews

Chain Link Pin Remover, For Watch Bracelet Links

997 1060

Used for removing chain link pins from watch bracelets, this handheld jig is quick and simple to use. Place the bracelet under the pin and turn the knob - the pin will be pushed out. A watch strap can measure up to a maximum of 28mm in width. ... Read More

£2.28 exc. VAT

In Stock

4 Customer Reviews

Watch Casing Cushion

997 1081

This watch casing cushion is a simple but essential tool for a watchmaking or watch repair workshop. The soft, padded watch case cushion protects watches when removing the case backs. 50mm diameter. ... Read More

£4.87 exc. VAT

In Stock

2 Customer Reviews

Friction Ball

997 1055

This friction ball is a great alternative to the standard watch case opener. As the name suggests it uses friction to open the case and so there is no chance of scratching the back of the watch whilst opening. ... Read More

£3.79 exc. VAT

In Stock

3 Customer Reviews

Watch Strap Spring Bars Assortment Box 360 Pieces

997 1086

A great addition to your watchmaker's bench, this box of assorted stainless steel spring bars is useful to have on hand for quick, easy watch adjustments and repairs. Featuring the most popular sizes, this 360 piece assortment contains 1.50mm diameter stainless steel, double flange spring bars in 20 diffe ... Read More

£17.50 exc. VAT

In Stock

Watch Case Knives - Swiss

999 109

This watch case knife folds out to reveal one cutting blade and one case opener, similar in design to a Swiss pen knife. Used for the removal of watch backs, the case opener is placed under the tab/lug on the back of the watch, and gently levered to aid the removal. ... Read More

£12.73 exc. VAT

In Stock

Set Of 5 Screwdrivers

999 117

A good quality basic set of screwdrivers. The heads/blades are of a relative size to the workings of a watch! Head sizes: 0.60mm, 1.00mm, 1.20mm, 1.40mm & 1.60mm. For an extended range of sizes (9 pieces held in a carousel - 0.60mm-3.00mm) see 999 118. For a general quality set of 9 pieces see 999 120. For a set ... Read More

£28.75 exc. VAT

In Stock

1 Customer Reviews

Wide Notch Watch Case Opener

997 1063

This wide notch watch case opener is designed for opening snap-on watch backs. The hand held case opening tool features a plastic handle and a wide, steel blade measuring approximately 8.40mm in width. ... Read More

£4.55 exc. VAT

In Stock

3 Customer Reviews

Dust Blower

997 1059

This dust blower is perfect for removing dust from watches, clocks, optics, electronics and other hard to reach spaces. Rather than blowing dust away with the mouth, which will fill the item with moisture from the breath and potentially cause damage, a dust blower is a simple tool which is invaluable for clean ... Read More

£4.94 exc. VAT

In Stock

1 Customer Reviews

Watch Case Opener Knife Edge

997 1052

Adjustable two notch watch case opener. Opens from 12mm to 60mm ... Read More

£8.12 exc. VAT

In Stock

Watch Strap Split Pins Assortment Box 540 Pieces

997 1084

A great addition to your watchmaker's bench, this box of assorted stainless steel split pins is useful to have on hand for quick, easy watch adjustments and repairs. Featuring the most popular sizes, this 540 piece assortment contains 0.80mm diameter stainless steel split pins in 30 different lengths. Si ... Read More

£12.00 exc. VAT

In Stock

1 Customer Reviews

Set 5 Spare Screwdriver Blades

999 119

A good quality set of spare screwdriver blades. The heads/blades are of a relative size to the workings of a watch! (Eg. 0.6mm - 3.0mm). For complete screwdriver sets see: 999 117 - set of 5 quality, supplied in a pouch. 999 118 - set of 9 quality, supplied on a carous 999 120 - set of 9 general quality, suppl ... Read More

£4.44 exc. VAT

In Stock

Watch Case Press With Dies Set

997 1070

This universal watch case press is an easy to use tool which makes fitting snap-on watch backs quick and simple. The case press is supplied with double-sided push-on dies for fitting watch backs of varying sizes. Once the top and bottom dies are fitted, the screw thread is turned to lower the top die onto the w ... Read More

£52.49 exc. VAT

In Stock

1 Customer Reviews

Watch Band Bracelet Block With Pin Adjusters

997 1064

This watch bracelet shortening kit features a bracelet holding block with various slot widths, for holding different thicknesses of watch bracelets. Also included are two different shortening punches with 0.8mm diameter and 1.0mm diameter pins, and three spare pins in each size. Please note that a hammer must ... Read More

£14.02 exc. VAT

In Stock

3 Customer Reviews

Single Blade Watch Case Opener Knife

997 1066

This single blade watch case opening knife features a small, curved blade measuring approximately 20.0mm in length. The blade is fixed to a sturdy metal handle and is an ideal tool for opening watch case backs. Total length including handle 115mm. ... Read More

£10.28 exc. VAT

In Stock

1 Customer Reviews

Watch Case Opener Square Notches

997 1053

Adjustable two notch watch case opener. Opens from 12mm to 60mm. With handle ... Read More

£13.53 exc. VAT

In Stock

1 Customer Reviews

9 Screwdrivers On A Carousel Head Size 0.6 To 3.0mm

999 118

A good quality set of 9 screwdrivers conveniently held in a carousel. The heads/blades are of a relative size to the workings of a watch! Head sizes: 0.60mm, 0.80mm, 1.00mm, 1.20mm, 1.40mm, 1.60mm, 2.00mm, 2.50mm & 3.00mm. Under the cap, in the middle of the base are 19 spare blades and 2 spare grub screws. For ... Read More

£41.91 exc. VAT

In Stock

Large Extra Grip Screwdriver

997 1076

This interchangeable, large handle watchmaker's screwdriver features a thicker, machined handle for improved grip. The screwdriver is supplied with five interchangeable flat head tips measuring 1.0mm, 1.2mm and 1.6mm, 1.4mm and 1.8mm wide. ... Read More

£28.65 exc. VAT

In Stock

1 Customer Reviews

Jaxa Key Watch Tool

997 1067

This Jaxa style key tool adjusts easily to open most sizes of screw type watch backs. The Jaxa Key features a machined handle for better grip, and is supplied in a wooden case complete with 12 jaws. Illustrated instructions are included. ... Read More

£12.18 exc. VAT

In Stock

2 Customer Reviews

Double Blade Watch Case Opener Knife

997 1065

This double blade, fold out case opening knife can be used to open a variety of watch case backs. It features a shorter, curved blade measuring approximately 22.5mm, and a longer blade measuring approximately 43.0mm. Total length when closed 85.0mm. ... Read More

£13.64 exc. VAT

In Stock

Economy Universal Watch Case Press

997 1069

The economy universal watch case press is an easy to use tool which makes fitting snap-on watch backs quick and simple. The case press is supplied with six different sizes of nylon dies, which can be screwed into the upper and lower parts of the press tool to fit watch backs of varying sizes. Die sizes include 1 ... Read More

£23.27 exc. VAT

In Stock

Single End Spring Bar Tool

997 1075

This single ended spring bar tool features a total of two different tips. The tool has a reversible tip with one forked end and one pin shaped end. Spring bar tools are useful watchmaking tools for removing and fitting watch straps and bracelets. ... Read More

£11.10 exc. VAT

In Stock

Clock Winding Key 4 In 1

999 6849

• Universal clock winding key
• Made from brass
• Sizes; 8, 10, 12, 14

New

£4.75 exc. VAT

In Stock

Watch Strap Screws Assortment Box 360 Pieces

997 1085

A great addition to your watchmaker's bench, this box of assorted stainless steel watch screws is useful to have on hand for quick, easy watch adjustments and repairs. Featuring the most popular sizes, this 360 piece assortment contains stainless steel watch screws in 18 different standard sizes. ... Read More

£12.00 exc. VAT

In Stock

Large Movement Holder Vice

997 1078

This medium scale, adjustable watch movement holder is an essential tool when carrying out repairs and servicing on slightly larger watches. Adjusted via a screw type handle, this movement holder will accomodate watch movements measuring from 9mm to 65mm in diameter. ... Read More

£6.23 exc. VAT

In Stock

1 Customer Reviews