(33 Customer Reviews)

Product Code : 999 082

The Bench Peg and Anvil set comprises of an anvil made from metal, and a wooden bench peg. The ideal tool for those who don't have a Jewellers Bench. The Peg is secured to the bench with a G Clamp, with the 'slanted' surface uppermost.

In Stock

£10.25 exc. VAT

(4 Customer Reviews)

Product Code : 999 809

Steel anvil horn used for flattening and shaping metal. Surfaces should be kept clean and polished as any marks will impress on the surface of the metal. Length 110mm Height 40mm

Expected 04 Jul

Was £9.10

Now £7.28
exc. VAT

Sign in to rate this product

Product Code : 997 3602

Disc Cutting Set. To cut discs from approximately 1.3cm - 2.5 diameter. Five punches: 1.3cm, 1.6cm, 1.9cm, 2.2cm, 2.5cm made from steel. To operate: Remove all cutters. Insert metal sheet into centre slit under the circle required. Insert appropriate

In Stock

£24.75 exc. VAT

(2 Customer Reviews)

Product Code : 999 770

This entry level brass doming block offers great value for money. It has over 70 individual cups ranging from 2.7mm to 37mm diameter. The cups should always be kept clean and polished as any marks will be impressed on to the metal surface.

In Stock

£25.50 exc. VAT

(2 Customer Reviews)

Product Code : 999 3046

Entry level set of 24 steel doming punches on wooden stand with varying diameter from 2.3mm to 25mm. The punches should be kept clean and polished as any marks will be impressed on to the surface of the metal.

In Stock

Was £35.80

Now £28.64
exc. VAT

(3 Customer Reviews)

Product Code : 999 772

Disc Cutting Can be used to punch holes in a number of Different materials including metal,paper, card and leather. To Cut Discs From Approximately 5mm-16mm Diameter. Eight punches : 5mm, 6.5mm, 8mm, 9.5mm, 11mm, 13mm,

In Stock

£41.20 exc. VAT

Sign in to rate this product

Product Code : 999 083

Made from Wood these Pegs are replacements for those used with the 'Bench Peg & Anvil'. They are narrower than the ordinary peg though if out of

In Stock

£3.40 exc. VAT

(2 Customer Reviews)

Product Code : 999 775A

1 x 5cm steel doming block 24 x steel doming punches Sizes range from 2.3mm to 25mm. 1 x wooden stand to hold block & punches.

Only a few left in stock - order now

£92.50 exc. VAT

(2 Customer Reviews)

Product Code : 999 7152

Disc Cutting Set To Cut a Maximum of 1.0mm Sheet. To Cut Discs From Approximately 1/4" to 5/8" diameter. Seven punches : 1/4", 5/16", 3/8", 7/16", 1/2", 9/16" 5/8" Made from steel.

In Stock

£30.85 exc. VAT

Sign in to rate this product

Product Code : 999 772A

Disc Cutters are a useful tool, they punch discs from sheet metal, but can also be used to punch holes in a number of different materials including metal, paper, card and leather. Disc Cutting Set To Cut a Maximum of 0.7mm Sheet.

In Stock

£34.00 exc. VAT

(4 Customer Reviews)

Product Code : 999 772E

This deluxe disc cutting set is a great way to expand your design options. This set not only cuts flat discs, but also forms and cuts cone shaped discs. It comes with a small disc cutter and 21 punches (7 flat, 7 concave, and 7 convex) all nicely packaged in

In Stock

£72.25 exc. VAT

(1 Customer Reviews)

Product Code : 999 810

Anvil horn on base - Steel anvil horn can be afixed to a bench through 2 pre-drilled holes in the base. All surfaces should be kept clean and polished as any marks will impress on the surface of the metal. Length - 120mm

In Stock

£8.00 exc. VAT

Sign in to rate this product

Product Code : 997 3603

Disc Cutting Set. To cut discs from approximately 6mm -16mm diameter. Seven punches: 6mm, 8mm, 10mm, 11mm, 13mm, 15mm, 16 made from steel. To operate: Remove all cutters. Insert metal sheet into centre slit under the circle required. Insert appropriate cutter and strike

In Stock

£27.75 exc. VAT

Sign in to rate this product

Product Code : 999 777

This steel swage block has small D-shaped grooves which can be used for forming D-shaped pieces. The block can be used to create D shape wire. Or use sheet and a doming punch on its side to punch the sheet into the groove, to form a half tube shape.

In Stock

£18.13 exc. VAT

(2 Customer Reviews)

Product Code : 999 0971

Doming Punches are usefull tools that has a rounded ball on one end, and the other is designed to be hit with a jobbing hammer or mallet. Set of 18 Steel Doming Punches. Smallest size 2.5mm, to largest 14mm.

Expected

Was £29.45

Now £25.04
exc. VAT

(3 Customer Reviews)

Product Code : 999 7153

High quality dapping set for the professional jeweller who demands the very best. All pieces in this set are hardened, ground and highly polished for perfect results. Set comes with matching 65mm square dapping block with

In Stock

£195.00 exc. VAT

Sign in to rate this product

Product Code : 997 3610

This steel swage block offers ideal resilience when texturing, letter imprinting, riveting, and more. Use with Rubber Dampening Block to deaden sound and vibration, while having a sturdy and solid creating surface. measures: 10.2cm x 10.2cm x 2.5cm

In Stock

£19.75 exc. VAT

Sign in to rate this product

Product Code : 999 786

Bench Anvils are a legendary item that has been used for a very long time. People have been crafting many different variables of metals from an anvil since ancient times which just proves how usefull they are and have been.

In Stock

£20.80 exc. VAT

(2 Customer Reviews)

Product Code : 999 7155

New high precision Disc Cutter from Durston. This will cut from 3mm to 32mm. Punches are made with a special tool from hardened steel and grounded. Ends of punches are ground at perfect angle for great results.

In Stock

£172.85 exc. VAT

Sign in to rate this product

Product Code : 999 778

This steel swage block has small D-shaped grooves which can be used for forming D-shaped pieces. The block can be used to create D shape wire. Or use sheet and a doming punch on its side to punch the sheet into the groove, to form a half tube shape.

Expected 13 Jun

£62.75 exc. VAT

Sign in to rate this product

Product Code : 999 779

This steel swage block has small D-shaped grooves which can be used for forming D-shaped pieces. The block can be used to form D shape wire. Or use sheet and a doming punch on its side to punch the sheet into the groove, to form a half tube shape.

Expected

£59.27 exc. VAT

Sign in to rate this product

Product Code : 997 3609

This steel swage block offers ideal resilience when texturing, letter imprinting, riveting, and more. Use with Rubber Dampening Block to deaden sound and vibration, while having a sturdy and solid creating surface. measures: 5.7 x 5.7cm x 2.5cm

In Stock

£15.25 exc. VAT

Sign in to rate this product

Product Code : 999 765

Doming Punches are usefull tools that has a rounded ball on one end, and the other is designed to be hit with a jobbing hammer or mallet. The puches should be kept clean and polished as an marks will be impressed into the surface of the metal.

In Stock

£50.79 exc. VAT

Sign in to rate this product

Product Code : 999 89W

HEAD LENGTH 11CM, HANDLE 24.5CM, 2 X BALL DOMED FACES 14MM & 12MM WEIGHT 175GMS Made from steel with a wooden handle. Used in the first stages of raising on a soft support

In Stock

Was £25.90

Now £23.31
exc. VAT

Sign in to rate this product

Product Code : 999 758

This steel doming block has 17 holes, and is used for doming sheet into a cup shape. The cups should be kept clean and polished as any marks will be impressed onto the metals surface. The width & depth of each cup is :

In Stock

£61.50 exc. VAT