Drill Bits

Customise your own charms in glass, stone or shell, with our huge array of drill bits for jewellery making. Allow for finer work and detail with a drill shank or a piece from our jewellery making drill sets. Create rivets or one-off beads in a selection of substances.

Showing 1 - 25 of 76 products

Hss Twisted Drill 1.0mm

Hss Twisted Drill 1.0mm

970 100

Drills are the same thickness from shank to drill tip 1.0mm. Sold per piece. Made from steel. Other sizes available: Set of 20 assorted HSS drills available see 999 CH5.

£1.44 exc. VAT

In Stock

Add

Busch Shank Drill 1.0mm

Busch Shank Drill 1.0mm

971 120

the drill is mounted on a shank 2.3mm or 3/32nd the drill is 1.00mm sold per piece 1-5, 6+ a box = 6pcs A 3/32 collet is required to take this drill bit. Not suitable for drilling a hole deeper than the cutting

£1.90 exc. VAT

In Stock

Add

Busch Shank Drill 0.8mm

Busch Shank Drill 0.8mm

971 030

the drill is mounted on a shank 2.3mm or 3/32nd the drill is 0.80mm sold per piece 1-5, 6+ a box = 6pcs A 3/32 collet is required to take this drill bit. Not suitable for drilling a hole deeper than the cutting

£1.90 exc. VAT

In Stock

Add

Set Of 20 Drills 0.3-1.6mm

999 CH5

Made from steel. Each drill is the same thickness from shank to drill tip Available individually see 970 010-140.

£13.70 exc. VAT

In Stock

Add

Hss Twisted Drill 0.80mm

Hss Twisted Drill 0.80mm

970 080

Drills are the same thickness from shank to drill tip 0.80mm. Sold per piece. Made from steel. Other sizes available: Set of 20 assorted HSS drills available see 999 CH5.

£1.44 exc. VAT

In Stock

Add

Hss Shank Drill 1.0mm Made From    High Speed Steel By Busch

Hss Shank Drill 1.0mm Made From High Speed Steel By Busch

971 175

THE MAIN FEATURES OF DRILLS MADE FROM HIHG SPEED STEEL ARE: LONG LIFE DUE TO HIGH TEMPERATURE STABILITY. UNLIKELY TO FRACTURE,EVEN THE SMALLER SIZES. CONSTRUCTED FOR HARD MATERIALS EG. PLAT & 18W SUITABLE ALSO FOR PEARLS &CORALS

£2.55 exc. VAT

Only a few left - more expected 12 Dec

Add

Swiss Shank Drill Set Of 12 0.5mm To 1.6mm

Swiss Shank Drill Set Of 12, 0.5mm To 1.6mm

999 0419

Made from tough, hardened vanadium steel, these Maillefer drills are precision ground and tempered for durability and long life. Their uniform 3/32" shank size helps streamline tool changes. This set has 12 twist drills, on of each size. The set includes:

£17.99 exc. VAT

In Stock

Add

Busch Shank Drill 0.5mm

Busch Shank Drill 0.5mm

971 010

The drill is mounted on a 2.35mm shank, or 3/32nd. The drill is 0.50mm. A 3/32 collet is required to take this drill bit. Not suitable for drilling a hole deeper than the cutting bit itself.

£1.90 exc. VAT

In Stock

Add

Hss Shank Drill 0.80mm Made From   High Speed Steel By Busch

Hss Shank Drill 0.80mm Made From High Speed Steel By Busch

971 173

THE MAIN FEATURES OF DRILLS MADE FROM HIHG SPEED STEEL ARE: LONG LIFE DUE TO HIGH TEMPERATURE STABILITY. UNLIKELY TO FRACTURE,EVEN THE SMALLER SIZES. CONSTRUCTED FOR HARD MATERIALS EG. PLAT & 18W SUITABLE ALSO FOR PEARLS &CORALS

£2.55 exc. VAT

In Stock

Add

Hss Twisted Drill 1.5mm

Hss Twisted Drill 1.5mm

970 130

Drills are the same thickness from shank to drill tip 1.5mm. Sold per piece. Made from steel Other sizes available: Set of 20 assorted HSS drills available see 999 CH5.

£1.44 exc. VAT

In Stock

Add

Busch Shank Drill 0.7mm

Busch Shank Drill 0.7mm

971 040

the drill is mounted on a shank 2.3mm or 3/32nd the drill is 0.70mm sold per piece 1-5, 6+ a box = 6pcs A 3/32 collet is required to take this drill bit. Not suitable for drilling a hole deeper than the cutting

£1.90 exc. VAT

In Stock

Add

Busch Shank Drill 0.6mm

Busch Shank Drill 0.6mm

971 020

the drill is mounted on a shank 2.3mm or 3/32nd the drill is 0.60mm sold per piece 1-5, 6+ a box = 6pcs A 3/32 collet is required to take this drill bit. Not suitable for drilling a hole deeper than the cutting

£1.90 exc. VAT

In Stock

Add

Busch Shank Drills Set Of 12

Busch Shank Drills Set Of 12

971 151

A set of 12 high quality Busch steel drills, including the following sizes: 0.50, 0.60, 0.70, 0.80, 0.90, 1.00, 1.10, 1.20, 1.30, 1.40, 1.50 and 1.60mm. Supplied in a handy sliding box.

£16.55 exc. VAT

Only a few left - more expected 15 Dec

Add

Hss Twisted Drill 0.50mm

Hss Twisted Drill 0.50mm

970 030

Drills are the same thickness from shank to drill tip 0.5mm. Sold per piece. Made from steel. Other sizes available: Set of 20 assorted HSS drills available see 999 CH5.

£1.44 exc. VAT

In Stock

Add

Busch Shank Drill 1.2mm

Busch Shank Drill 1.2mm

971 070

the drill is mounted on a shank 2.3mm or 3/32nd the drill is 1.20mm sold per piece 1-5, 6+ a box = 6pcs A 3/32 collet is required to take this drill bit. Not suitable for drilling a hole deeper than the cutting

£1.90 exc. VAT

In Stock

Add

Busch Shank Drill 1.5mm

Busch Shank Drill 1.5mm

971 090

the drill is mounted on a shank 2.3mm or 3/32nd the drill is 1.50mm sold per piece 1-5, 6+ a box = 6pcs A 3/32 collet is required to take this drill bit. Not suitable for drilling a hole deeper than the cutting

£1.90 exc. VAT

In Stock

Add

Hss Twisted Drill 2.0mm

Hss Twisted Drill 2.0mm

970 140

Drills are the same thickness from shank to drill tip 2.0mm. Sold per piece. Made from steel Other sizes available: Set of 20 assorted HSS drills available see 999 CH5.

£1.44 exc. VAT

In Stock

Add

Hss Twisted Drill 1.2mm

Hss Twisted Drill 1.2mm

970 120

Drills are the same thickness from shank to drill tip 1.20mm. Sold per piece. Made from steel Other sizes available: Set of 20 assorted HSS drills available see 999 CH5.

£1.44 exc. VAT

In Stock

Add

Hss Twisted Drill 0.90mm

Hss Twisted Drill 0.90mm

970 090

Drills are the same thickness from shank to drill tip 0.90mm. Sold per piece. Made from steel. Other sizes available: Set of 20 assorted HSS drills available see 999 CH5.

£1.44 exc. VAT

In Stock

Add

Swiss Shank Drill 0.8mm

£1.95 exc. VAT

In Stock

Add

Diamond Shank Drill 1.0mm

Diamond Shank Drill 1.0mm

999 342

Made from steel, the cutting 'bit' of this drill is impregnated with tiny diamond pieces. The 'shank' (piece of drill bit which is held in the collet/chuck) measures 3/32's of an inch (about 3mm) and is often larger than the cutting bit itself.

£8.69 exc. VAT

In Stock

Add

Swiss Shank Drill 1.0m

£1.95 exc. VAT

In Stock

Add

Hss Twisted Drill 0.70mm

Hss Twisted Drill 0.70mm

970 060

Drills are the same thickness from shank to drill tip 0.70mm. Sold per piece. Made from steel. Other sizes available: Set of 20 assorted HSS drills available see 999 CH5.

£1.44 exc. VAT

In Stock

Add

Hss Shank Drill 0.70mm Made From   High Speed Steel By Busch

Hss Shank Drill 0.70mm Made From High Speed Steel By Busch

971 172

THE MAIN FEATURES OF DRILLS MADE FROM HIHG SPEED STEEL ARE: LONG LIFE DUE TO HIGH TEMPERATURE STABILITY. UNLIKELY TO FRACTURE,EVEN THE SMALLER SIZES. CONSTRUCTED FOR HARD MATERIALS EG. PLAT & 18W SUITABLE ALSO FOR PEARLS &CORALS

£2.55 exc. VAT

In Stock

Add

Busch Shank Drill 0.9mm

Busch Shank Drill 0.9mm

971 050

the drill is mounted on a shank 2.3mm or 3/32nd the drill is 0.90mm sold per piece 1-5, 6+ a box = 6pcs A 3/32 collet is required to take this drill bit. Not suitable for drilling a hole deeper than the cutting

£1.90 exc. VAT

Only a few left - more expected 06 Dec

Add

Please note all prices listed are based on cash prices and are exclusive of VAT. Final price will be confirmed during the checkout process. Bullion prices are based on 10gm.

Back to top

Drill Bits from Cooksongold

A drill is the most accurate way of creating rivets for metal jewellery, and with one of our drills you’ll get the rivet hole in the place you wish. Use your drill to make rivet holes for a chic cuff, beautiful bracelet or a fashionable statement necklace. You can drill just about any stone you can find – including beach stones – but we recommend you begin with sedimentary rocks such as sandstone, mudstone or limestone. A helpful drilling tip when drilling glass or shell is to wear safety glasses and work on your item whilst it’s sunk into water to keep it cool. For long shank drill bits try our Hss Shank Drill 1.0mm, Hss Shank Drill 0.80mm or our Hss Shank Drill 0.50mm – all made from high speed steel and by Busch, the efficient, innovative and century-old company that manufacture rotary precision instruments and tools worldwide.

Shank Drills & Drill Sets
Some of you have already been getting busy drilling your way to silversmith success! You told us our Busch Shank Drill 1.0 mm was a quality instrument that lasts that much longer in your studio. One of the best ways to get started with drilling techniques is to invest in one of our drill sets. A great example of our drill sets is our set of 20 Drills at 0.3 - 1.6mm in size. It’s easy to produce the precious gems you want with our jewellery drill shanks and jewellery drill shank sets. Whether you choose to customise charms, drill into sandstone, shell or simply put the finishing touches to your wrist cuffs and rings, take your pick from our comprehensive collection of drill bits for jewellery making. For advice and orders call our jewellery making experts today on 0845 100 1122 and don’t forget, orders placed before 3pm today warrant next day delivery too!

Sign up for news, offers and competitions

Sign up!

  • Visa
  • Mastercard
  • Switch
  • iso9001
  • iso14001
  • iso18001

Customer Service

About Us

Community

© 2014 Cookson Precious Metals Ltd. VAT Registration No. GB161 8062 21. Registered in England no. 2775187. Registered Office: 59-83 Vittoria Street, Birmingham, B1 3NZ
Tel: 0845 100 1122 or 0121 200 2120 Fax: 0121 212 6456