Question 1

how do you use a metal stamp cutter?

Accepted Answer

"Disc cutters can be used to punch holes in sheet metal and other materials, including paper, card and leather. 1. Remove all of the cutters from the base before use. 2. Move the metal sheet into the centre slit under the size circle you require. 3. Insert the corresponding cutter and strike it with a hammer. 4. The metal disc will be stamped from the sheet and will be found on the underside of the tool. There are many sizes of metal stamp cutters available. Browse the full range of disc cutters at Cooksongold."

Question 2

how to stamp metal on a curved surface?

Accepted Answer

"Follow these easy steps on stamping on a curve: 1. Take the ImpressArt circle guide and apply it towards the top of your circular metal blank to leave space for your stamping along the bottom edge. Or apply it towards the bottom if you wish to stamp at the top. 2. Write the message you wish to stamp directly onto the circle guide and make use of the guidelines to help with even spacing. 3. Bring the stamp to the blank and lightly drag it towards the guide until the bottom of the stamp catches the edge of the guide. 4. Then stamp with one blow of the hammer and repeat until the message or design is complete. If you're looking to stamp a design onto a domed piece of metal, the stamping should always come before the doming process - although be aware that the impressions may change slightly once the metal is formed."

Question 3

how to stamp leather with metal stamps?

Accepted Answer

"Most of the ImpressArt tools can be used on designer quality leather. 1. Lay the leather over a stamping block and secure it down with tape. Then, lay an ImpressArt stamp guide over the top to mark out where your stamps will go. 2. Then, simply take the first stamp with your hammer and hit the stamp once to make an impression on the leather - just as you would when stamping on metal. 3. Repeat the process until your design is complete."

Question 4

how to line up letters for metal stamping?

Accepted Answer

To ensure you have a straight line of letters, you can use the ImpressArt Stamp Straight Tape. It's a quick and easy way to line up letter, number and design punches for a straighter, more professional finish. The tape can be directly applied onto the metal, using the top edge as a guide for where you would like the bottom edge of your design to sit. Place your chosen metal stamp on the metal blank and lightly drag it down until you feel the edge of the tape. Then, stamp! Repeat this process for each letter and your word will be lined up perfectly. The tape can also be used with a ruler and pen to measure and mark an evenly sized space for each letter.

Question 5

can leather stamps be used on metal?

Accepted Answer

Typically, leather stamps are far too soft for use on metal. With very soft silver and a gentle touch, you may get a series of impressions but, for a quality finish, it is recommended to use metal stamps. If you're unsure, refer back to the manufacturer for more advice.

Question 6

What is metal stamping?

Accepted Answer

If you’re completely new to this, you might be wondering, “what is metal stamping?”. To put it simply, metal stamping is a form of jewellery making which is mainly used for pendants or drop earrings. It can be used to imprint letters, patterns and texture to your design for a unique finish.

Metal Forming & Stamping

Metal Stamping For Beginners: How To Stamp Metal

How To Use A Cooksongold Rolling Mill

5 Different Metal Working Files For Beginners

How To Use a Doming Set

How To Etch Copper In 8 Simple Steps

How To Work With Metal Working Hammers

Technique Focus: Mokume-Gane