Average Customer Review
(11 reviews)
16 Jun 2012 - by Carin L.
Fantastic product in my opinion, I have all of the silver solder pastes and the 9ct gold. To make it easier to flow out just warm it slighly, I put it on top of my pickle pot, that makes it perfectly easy to push out. And as soon as you have the required amount out, just apply some back pressure. I use it for almost everything Mine last for ever.
47 out of 49 people found this review useful
20 Feb 2011 - by Janina H.
Fantastic for a quick soldering job... Would never switch back to the conventional again
42 out of 44 people found this review useful
18 Feb 2011 - by Karen R.
This is a great product.Its brilliant how the flux is included and you can use it to sandwich pieces together where it would otherwise be hard to hold the individual components together.Very good product, but i once the syringe needle end has filled up and solder has dried in it it becomes useless.Now i just syringe solder out onto tweezer ends and apply like that onto my work.It is expensive though so dont use it when normal flux and ribbon solder works fine
52 out of 53 people found this review useful
16 Feb 2010 - by Theresa H.
I thought I would try this product based on the previous reviews and I cannot fault the product for use on tiny components, but the leakage is a problem even when the syringe is pulled back to release pressure. Very wasteful.A re-design is needed.
46 out of 48 people found this review useful
9 Dec 2009 - by Keith
I had two different joints to make in some stainless components. For the first one, this paste was useless, but for the second it was good. Same materials, different shaped joint. So its not the solution to all problems - you may well need a range of solders for different jobs. But this one can solve a problem - it did for me.
40 out of 43 people found this review useful
27 Mar 2009 - by David C.
This is very handy and saves time when soldering, sometimes solder seems to leaks from the nozzle when not in use but not enough to be a problem
53 out of 54 people found this review useful
16 Feb 2009 - by Gwyneth D.
This is an excellent product especially for items that are small and fiddly. It can take a bit of getting used to exerting the right amount of pressure so that you get the solder onto the item without ending up with a long tail of solder being extruded but this is quickly acquired. It is definately easier to manage than separate hard solder and flux.
56 out of 57 people found this review useful
22 Jan 2009 - by christopher c.
I have no problem with the flow of solder from the tip, I have found it so easy and economical, especially on small jump rings and items you cant afford much solder run or everything sticks together Always good value and fast service, thank you.
48 out of 49 people found this review useful
12 Nov 2008 - by Liam S.