So I am happy to say that apart from the infernal noise it makes, I have modified my engraver and it is now a setters hammer and it is perfect. I have rounded off the point and polished it to a shine because I will never use it for engraving and now can set a stone in seconds. I have not as of yet completed the electrical modification as you suggested Dennis, I am too busy with assignments right now, that can come when I am not as busy.
Thanks!!
Les
Poor old Les
Thank you for the feedback, Les. I am always afraid of leading people astray.
Now we only have to choose between the painful noise (slightly improved with modification) and the painful price of a more sophisticated one.
I should also mention, that the stems of a cheap 3.00mm drill bits from your local ironmonger will provide you with material for alternative points. They can be annealed for cutting and hammering and don't have to be re-hardened. Dennis.
Last edited by Dennis; 03-06-2019 at 09:16 PM.
Bookmarks