Results 1 to 10 of 11

Thread: Neckwires.Anyone make their own?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Feb 2011
    Location
    Scotland
    Posts
    3,404

    Default Neckwires.Anyone make their own?

    Does anyone make their own neckwires? I usually use the Cookson omega but as they don’t stock the longer lengths I have to buy them from Curteis, I hate their website and I think they’ve got expensive.
    Looking for other chain stockist too, I usually use belcher but thought a change would be good but it’s so difficult to choose online and time is limited

  2. #2
    Join Date
    Dec 2014
    Location
    South Australia
    Posts
    1,849

    Default

    I make my own they are just like really big jump rings, I can't get Argentium over 1.6 in Australia so I have to get the thicker stuff if I want it From Cookson

  3. #3
    Join Date
    Feb 2011
    Location
    Scotland
    Posts
    3,404

    Default

    I think we’re maybe talking at cross purposes Bob. I was thinking more like these https://www.cooksongold.com/Finished...prcode-VVI-OFR. I think I’ll have to stick with Curteis

  4. #4
    Join Date
    Dec 2014
    Location
    South Australia
    Posts
    1,849

    Default

    Ah yes my mistake, not concentrating getting my gear together, for the ANZAC dawn service then the march representing my father, Kilt seems to be shrinking ( or maybe I am expanding )

  5. #5
    Join Date
    Jul 2009
    Location
    cotswolds
    Posts
    3,385

    Default

    Have you tried W J Sutton? https://www.925jewellery.co.uk/ - good prices and a pretty wide range - not always using the same chain names though, so it takes a bit of ploughing through to find what you're looking for.

  6. #6
    Join Date
    Feb 2011
    Location
    Scotland
    Posts
    3,404

    Default

    Thanks George. I hadn’t thought of them, will have a look.

    Kilts tend to shrink over time Bob put an extra hole or 2 in the buckle and move the buttons

  7. #7
    Join Date
    Feb 2011
    Location
    West Berkshire
    Posts
    660

    Default

    I also use the Omega - do you find it's too easy to kink, Caroline? Been a bit disappointed with them recently. I would like to find a multi cable one but no success yet.

  8. #8
    Join Date
    Feb 2011
    Location
    Scotland
    Posts
    3,404

    Default

    I use the 1.5 Theresa. I measured my other ones from Cookson and the 1mm was anything between .8 and .9 and the 1.2 were about 1.12, that’s useless really. They used to do a 3 strand which was quite nice but I see they’re selling .8 and 1mm to make your own so I suppose you could strand them up.
    Curteis 18 in 1.5 arrived and they are good but their website is so difficult to understand. that I bought a foot of snake when I understood their wording that they were selling in 3 ft lengths:/ I have a useless ft of 3 mm snake now. I ordered more chain on the phone and I have no idea how much I spent , I wasn’t impressed really

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •