Results 1 to 4 of 4

Thread: Propane only or oxy-propane torch?

  1. #1
    Join Date
    Jan 2018
    Posts
    3

    Question Propane only or oxy-propane torch?

    Hi there everyone, I was hoping someone could give me some advice?

    I'm pretty new to silverwork (I'll be using pure and sterling). I've come to the point where I would like a soldering torch, but I'm confused as to whether I just need a propane torch like a Sievert (which is relatively cheap), or a dual-fuel oxy-propane (which can be quite an expensive set up). At the moment someone I know has an oxy-propane torch for sale (just the torch and hoses); not the tanks or regulator. It's very similar to a Meco Midget and I'm wondering whether it would be worth going for.

    Can anyone explain to me what the main differences are between the two systems, especially in relation to silverwork?

    I'll be working on mostly small pieces but obviously I'm hoping to progress in the future.

    Thank you for all your help.

    Cheers

    Benjinca

  2. #2
    Join Date
    Dec 2014
    Location
    South Australia
    Posts
    1,858

    Default

    Main difference with oxy/propane is a much hotter flame, plus a much smaller flame, this allows more direct pinpoint application of heat, I made the change from a Sievert type torch years ago, and I would never go back
    I would suggest if you can set with oxy/propane to begin win then go for it
    Last edited by china; 12-04-2019 at 01:46 PM.

  3. #3
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,904

    Default

    Here are past conversations on this subject, for you to browse: https://www.cooksongold.com/forum/se...archid=1634406

  4. #4
    Join Date
    Jan 2018
    Posts
    3

    Default

    Thank you for your advice!

    Benjinca x

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •