Results 1 to 3 of 3

Thread: Felt Pendant Wheels - Won't fit

  1. #1
    Join Date
    Aug 2017
    Posts
    232

    Angry Felt Pendant Wheels - Won't fit

    Felt-Pendant-Wheel-prcode-999-ACM

    Is anybody else having trouble fitting these pendant wheels in their Foredom Quick Release H.20 Handpiece? I ordered a few of these mops a while ago and after wearing out one I tried to replace it. NONE of the ones I had left would go into the Foredom collet. So I ordered 3 new ones--which arrived today--thinking the last were a bad batch and NONE of them fit my handpiece. They are all described as 3/32 and I have no problem with other 3/32 shanks.

  2. #2
    Join Date
    Dec 2014
    Location
    South Australia
    Posts
    943

    Default

    Measure the shaft if it is larger than 3/32 send them back, or if you have a H-30 handpiece you could use that

  3. #3
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    7,400

    Default

    When that happens, sometimes only the very end is a bit too fat. It can be verified with callipers. If so a quick file and sandpaper will solve your problem. Dennis.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •