Making Seamless Tubing Using Argentium Silver.

[Dennis]

I am well pleased with the beauty and enduring shine of Argentium silver, but some items of bullion are not yet available in the UK.

So with some trepidation, I set out to make 3.0mm tubing, using strip 0.4mm thick and 15.0mm wide.

It turned out to be surprisingly easy, first to swage it in a swage block and then form it around a steel rod until the edges met using a fibre jawed vice. Nylon jawed pliers might have done the same.

Next the end of the tube was sharpened and flattened, so as to begin the drawing down process. The edges quickly came close together and were fluxed and fused with a long sharp flame using my Proxxon mini torch.

The torch did struggle to fuse more than about 35.0mm in length, so I made several pieces. A Smith’s Little Torch might have been better.

The tube was then further drawn to the required size for setting 0.3mm CZs. Final external diameter, 3.6mm. Not a seam in sight.
Dennis.