Results 1 to 9 of 9

Thread: Another ring

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Apr 2010
    Location
    Exeter, Devon
    Posts
    1,803

    Default Another ring

    I have been asked i to make a ring, or at least four rings fixed at the back and slightly apart at the front with four c.z's randomly across the four rings. I have made four rings and soldered them together at the back, but when I bend the silver "d" wire slightly apart the solder splits. I have done this several times now and don't want to be beaten by it. I made the rings and soldered together afterwards, would it be worth cutting the d wire and soldering before bending into ring shape. The one the customer saw was cast.
    Last edited by Patstone; 02-11-2017 at 09:44 AM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •