Results 1 to 7 of 7

Thread: The Link In link Chain.

  1. #1
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,845

    Default The Link In link Chain.

    Our main class project last term was to make a link in link chain. This obviously was an attractive idea, because soon there were copper wire experiments going on all around.

    Most of my colleagues were making bracelets, but I was in need of a necklace chain for my lotus pendant.

    The idea was to make large wire jump rings, using dimensions from experiments in copper. They were then stretched to a loop shape by opening round nose pliers inside them, or using circlip pliers.

    Next the loop was folded around a mandrel, a scriber inserted into the two ends and a waist pinched horizontally and vertically with round pliers, to complete the shape.

    We were encouraged to use fine silver wire and fuse the joins, because solder tends to interfere with the smooth shaping of the links, but this turned out to be the most difficult part to master, with an unacceptably high failure rate. Were I to do it again, I would hope to be more successful using Argentium.

    From my experiments I decided on 80 links. Once made they were easily slipped into each other to grow two pieces of chain with a total length of 72cm, attached to the pendant with jump rings. A hook and lotus bud charm were added to the free ends.

    15mm jump rings made from 0.7mm fine silver wire.
    Mandrel for link: Stem of 3mm twist drill.
    Further reading: Classical Loop In Loop Chains, by Jean Reist Stark and Josephine Reist Stark. Dennis.
    Attached Thumbnails Attached Thumbnails Lil 1 Making the Links.jpg   Lil 2 Forming the Waist.jpg   Lil 3 The Chain.jpg   Lil 4 The Necklace.jpg  

  2. #2
    Join Date
    Jul 2014
    Location
    Preston, Lancashire.
    Posts
    150

    Default

    That style of chain suits your pendant very well - and each link looks so lovely and even.
    Sally

  3. #3
    Join Date
    Jul 2009
    Location
    cotswolds
    Posts
    3,383

    Default

    It's lovely Dennis - I like the link shapes very much. You're absolutely right as well - link in link is much, much easier in argentium!

  4. #4
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,845

    Default

    Thank you Sally and George for looking. Dennis.

  5. #5
    Join Date
    Aug 2009
    Location
    London
    Posts
    884

    Default

    Wow, this looks like it required a lot of patience! The finished necklace is lovely.

  6. #6
    Join Date
    Feb 2016
    Posts
    99

    Default

    Lovely work as usual Dennis. When making the chain did you shape each links first loop on the mandrel and the thread through the previous link before making the second loop or did you thread the flat oval through the first link and then shape? It sets off the lotus beautifully.

  7. #7
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,845

    Default

    Thank you Lauren and Ceri.
    All the links were made first, with the ends prised slightly apart. Then they were linked just with fingers to build two sections of chain. Finally they were pinched again with round pliers where necessary to tidy them up.
    Actually I found it quite rewarding to end up with a good strong chain for my purpose. Dennis.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •