Results 1 to 4 of 4

Thread: Curved ID bar

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jun 2017
    Posts
    4

    Default Curved ID bar

    Hi all

    I've ordered some curved ID bars to stamp and I've only just clicked, how am I going to stamp a curved bar on a flat bench block!

    Can anyone help? 😂

    Thanks

    Clair

  2. #2
    Join Date
    Jul 2009
    Location
    Romsey
    Posts
    5,256

    Default

    Setters wax, pitch, matsu yani - build up a small mound of it on e.g. a small piece of plywood, stick the ID bar to that (use a heatgun, it's less faff than a torch) and once it has cooled you can stamp the curved surface.

  3. #3
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,845

    Default

    Of curse you can just hunt around the house for a curved wooden object, or file a piece of wood to the right curve, to rest your pieces on. You might have a wooden clothes hanger to cut up for instance.

    You could also use a bangle mandrel, steel or wood, resting on its side.

    The pieces could then probably be held in place with masking tape, or heavy elastic bands for stamping. Dennis.
    Last edited by Dennis; 09-06-2017 at 09:18 PM.

  4. #4
    Join Date
    Jun 2017
    Posts
    4

    Default

    Thanks for your replies ! 😊😊

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •