Results 1 to 10 of 12

Thread: Hybrid Design - Ornament

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Mar 2013
    Location
    Northeast UK
    Posts
    821

    Default Hybrid Design - Ornament

    Hi everyone,

    Since deciding to make my own jewellery boxes for my rings, bracelets, pendants etc a while ago I've been getting more and more into woodworking, and I find that its compliments jewellery making fantastically well!

    So.. I made my old Mum a heart shaped hanging ornament from some scrap Oak I had in the mancave a month or so ago, and from there its developed into making many more of various designs for my other jewellery customers.

    Thought you might like to see a few pics, despite them not being jewellery strictly speaking.

    These are recent ones made this week. Both from solid Oak with silver bails, and the fancy one has a solid silver heart cast in cuttlefish. Cheers everyone.

    Nick








  2. #2
    Join Date
    Mar 2013
    Location
    Northeast UK
    Posts
    821

    Default




  3. #3
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,851

    Default

    They have a country craft look, very nostalgic for a townie like me Nick. I see you have a mini belt sander which is good for woodwork, but hard on fingers. Dennis.

  4. #4
    Join Date
    Mar 2013
    Location
    Northeast UK
    Posts
    821

    Default

    Thanks Dennis and I was aiming for an organic crafty look so I'm pleased at that.

    The belt sander is actually a bit of a beast and quite large and powerful. It's a Robert Sorby Pro-Edge sharpening system and it's primarily used for honing and reprofiling my lathe chisels. I do have a small bench mounted one too that's powered by my foredom pendant motor.

    Cheers,

    Nick

  5. #5
    Join Date
    Feb 2014
    Location
    Manchester
    Posts
    632

    Default

    It's nice to see these, Nick. What treatment do you give the wood to finish off? Several coats of polyurethane varnish sanded between coats?

    I'm a bit worried you have to have a mancave, unless you call the whole house your mancave.

  6. #6
    Join Date
    Mar 2013
    Location
    Northeast UK
    Posts
    821

    Default

    They're simply sanded to 2000 grit, have finishing oil applied, then buffed with several different Menzerna polishing compounds as you would with jewellery.

    My mancave is my garage. Totally taken over with tools and machinery

    Nick

  7. #7
    Join Date
    Dec 2014
    Location
    South Australia
    Posts
    1,848

    Default

    I like that, being a Cabinet maker by trade I make many of my own boxes, I have made many items of jewellery from various timbers over the years, substituting timber for stones in rings
    and pedants can really look nice

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •