Results 1 to 3 of 3

Thread: Sourcing Copper & Silver for Gold Alloying

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Mar 2016
    Posts
    2

    Question Sourcing Copper & Silver for Gold Alloying

    Hi,

    I'm looking to create my own 18kt gold, I'm hoping to create a deep yellow gold alloy. After researching some alloy recipes I've decided I'll take my chances on Gold 75%, Copper 15%, Silver 10%.

    My question is, must I source pure copper and silver? I can of course find 999 'fine-silver' but I haven't seen any indications of purity for copper products. There appears to be no fine-silver or copper grain on Cooksongold. What am I supposed to use?

    Many thanks.

  2. #2
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,904

    Default

    That's an experiment which is likely to end in disappointment, because the colour you are hoping for is close to that of pure gold.

    Cooksons 22 and 18ct are already beautiful and anything you can mix will be indistinguishable to the untrained eye.

    However they say that they will provide grains of metals to order, or you could use a gold bullion bar and for silver and copper snip 2.00mm wires. Dennis.
    Last edited by Dennis; 25-11-2016 at 05:36 AM.

  3. #3
    Join Date
    Jan 2014
    Location
    Brisbane, Australia
    Posts
    67

    Default

    Hi
    I believe that a deep yellow colour is usually obtained by adding zinc, in which case you should use a defined brass alloy (+ copper +/- silver if required), which should be obtainable from base metal suppliers.
    Cheers Matt

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •