Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: OCPTT-What I have Learned About Flush Setting.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,851

    Default OCPTT-What I have Learned About Flush Setting.

    Our class project this term, was to make a box with surface decoration, possibly by etching which had been an ongoing tutorial.

    As I am not keen on etching as a process, I opted for roll texturing instead. There was no mention of a lid, so my interpretation was to make a closed box with 21 flush set synthetic stones to represent a die, as a desk toy or paperweight

    It was not that difficult to match the burrs to the stones for a close fitting seat, but much more so to have all the tables at exactly the same level. In my picture you will notice slight differences.

    The pusher used is unusual, made on a course many years back, which allows plenty of pressure with minimal damage to the metal surface. Finally, a burnisher made from a burr with the head removed and held in a universal handle was used to create a bright circle.

    Testing the result with strong adhesive tape for loose stones did not disclose any problems, but when as an experiment, I tried the burnisher in a slow running handpiece, two stones began to vibrate and rotate. They were easily tightened up, but could have caused trouble in the future.

    Silver thickness 1.3mm. Size of cube 25.0mm. Dennis.
    Attached Thumbnails Attached Thumbnails spb1 Box Project Term 3 '16.jpg   spb2 Setting Tool.jpg   spb3 Burnisher for Flush Set Stones.jpg  

  2. #2
    Join Date
    Jan 2012
    Location
    dear old Blighty - (in deepest Wiltshire)
    Posts
    1,638

    Default

    Oh, Dennis... what a brilliant piece. No gambling with that design at all.

  3. #3
    Join Date
    Jan 2014
    Location
    Dorset
    Posts
    135

    Default

    That is so neat! Gives me a great gift idea for hubby.. but then for Yatzee I'd have to make 2!
    Sam

  4. #4
    Join Date
    Mar 2011
    Location
    Manchester UK
    Posts
    942

    Default

    top job Dennis and a great photograph as usual.

  5. #5
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,851

    Default

    Thank you Wallace, Sam and Josef. Why not have a go, Sam?

  6. #6
    Join Date
    Jul 2009
    Location
    cotswolds
    Posts
    3,385

    Default

    I love it Dennis - and just the right size too

  7. #7

    Default

    Wow - superb!


    Sent from my iPad using Tapatalk
    Using Tapatalk

  8. #8
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,851

    Default

    Thank you George, Sarah and Jeannette for liking my desk toy. I find perfection rather elusive, Sarah.
    There are others here who manage it better. Regards Dennis.

  9. #9
    Join Date
    Feb 2014
    Location
    Manchester
    Posts
    632

    Default

    Very nice precise work, Dennis.
    Are you willing to tell us how you made the box?

  10. #10
    Join Date
    Nov 2014
    Location
    Cheshire
    Posts
    359

    Default

    That's really nice Dennis, very covetable. How long would you say it took you to set all those stones, so carefully too.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •