Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Insulation for my workshop????

  1. #1
    Join Date
    Jul 2009
    Location
    Norfolk,England
    Posts
    305

    Default Insulation for my workshop????

    Hopefully i will soon be getting my very own little shed as a workshop,i keep hinting very heavily to OH and he's getting fed up with me going on about it so should be happening very soon, either that or he's gonna bury me in the garden as he's been talking about concreting an area over! lol
    but the real question is what should i use to insulate it as i have read other threads and you all agree that it is a must!
    Bridget x x

    Never be afraid to try something new,remember amateurs built the Ark,
    professionals built the Titanic!!!



    http://www.rusticcharmjewellery.co.uk

  2. #2
    Join Date
    Jul 2009
    Location
    Market Deeping
    Posts
    2,693

    Default

    Most sheds have battons on the inside so you could use loft insulation and then board over it....
    Monthly FREE entry giveaways on Blogs!
    Shop Blog: http://muranosilver.blogspot.com/
    Silver Clay Blog: http://pmctips.blogspot.com/
    View images of my work on Flickr: http://www.flickr.com/photos/muranosilver

  3. #3
    Join Date
    Jul 2009
    Location
    Rye Foreign, East Sussex
    Posts
    2,221

    Default

    If i was working in a shed i would definately want insulation as i can imagine it would be freezing in the winter.

    I would think that that would also not be good from the tool care point of view, due to the condensation issue.

    I do hope you get sorted soon, i have just sent a very large hint to my son again about clearing his room, so that i can start moving stuff in there.
    Su' xx

    My FB fanpage -https://www.facebook.com/CintaHandCraftedJewellery
    My Website www.cintahandcraftedjewellery.co.uk

    I want to learn so much, and i want to know it all NOW!!!:p

    One day i will arrive

    A huggle a day makes the bad stuff go away

  4. #4
    Join Date
    Jul 2009
    Posts
    1,293

    Default

    Yes, I agree with Nic. That is what I did last winter. I used wool insulation from B&Q since I was doing it myself and don't like fibreglass - and it was on offer...and environmentally friendly!! You can also tease it apart to get it to the right thickness to fill the gaps without covering yourself with nasty fibreglass.
    I staple gunned the insulation into place and I then cut panels of hardboard that spanned the sections in the shed and used a nail gun to attach them to the struts. All quite easy on the walls...not so easy on the roof! as the hardboard sags. I have used some lightweight (aluminium?) angle iron that we had kicking around from some past job, to brace the panels on the roof and that seems to work well..not very decorative though!!
    I have not insulated over the soldering/fusing area or over the kiln...not wanting to tempt fate or lower the roof level!!
    All of it is painted primrose yellow to make it bright and cheery in the winter - with 'arty photos' and 'words of wisdom' pinned up all around!!
    It still gets bloomin' cold out there though!! - so invest in a good heater!!

  5. #5
    Join Date
    Jul 2009
    Location
    Cornwall
    Posts
    3,172

    Default

    I got my "shed" from Dunster and it came with insulated floor, walls and roof and also double glazing. Even so, it can be a bit chilly in really cold weather and I wear Ugg boots and an insulated jacket as well as having the heater on.
    Mind you my "shed" is 10 meters x 4 meters, so it's quite a large space.

  6. #6
    Join Date
    Aug 2009
    Location
    Birmingham, UK
    Posts
    866

    Default

    what should i use to insulate it
    Bat droppings - not as daft as it sounds

  7. #7
    Join Date
    Jul 2009
    Location
    Cornwall
    Posts
    3,172

    Default

    Quote Originally Posted by geti-titanium View Post
    Bat droppings - not as daft as it sounds
    Yuk!

    I agree about spending a bit more and getting something that you'll be happy in. I've also got electricity and hot water in mine and it's built on concrete piers so it's really secure. It was quite expensive (about £6,000 plus labour to put it up and put in resources etc) but worth every penny. We looked into getting one built the traditional way out of concrete blocks but it was going to cost a small fortune. I absolutely love my "shed". Dunster also do smaller ones which are less expensive.

  8. #8
    Join Date
    Jul 2009
    Location
    Norfolk,England
    Posts
    305

    Default


    thanx for all your input gang they are all being relayed to my OH, with the response i'm getting from him i think i'm getting a very small well insulated shed with a good heater atm!!!,which will be fine for me as anything will be better than living in the corner of the dining room as i'm doing atm bench and all!!

    any more ideas will still be greatly recieved!!!!!
    Bridget x x

    Never be afraid to try something new,remember amateurs built the Ark,
    professionals built the Titanic!!!



    http://www.rusticcharmjewellery.co.uk

  9. #9
    Join Date
    Jul 2009
    Posts
    1,293

    Default

    Following on from comments about flooring....how nice would under floor heating be!!!! Anyway - It sounds like you are more in my price bracket than Ben's....

    On the floor I have fitted offcuts of vinyl to try and cut out the upward draught and then I have sewn together sample 'tiles' of really good quality carpet (far better than I could ever afford in the house!!) to make a thick, bright, patchwork floor covering. I have then screwed all of these down on to the wood floor at odd points to stop them 'creeping' and to prevent any trip hazards. Obviously there is a risk mixing carpet and torches/red hot metal - so make sure you buy a fire extinguisher to go out there as well!!

    'Ugg' boots, thick socks, leg warmers, insulated undies, fleece sweat shirts/jackets, padded jacket, wooly hat (no scarf for safety reasons) should all be high on you Christmas list as well!

    Don't get me wrong - I really love my little 'studio' - but you do have to be realistic. There were days when it was just riiculous to even try to work out there....so don't entirely abandon you little corner of the dining room - you may find that you have to slink back in from time to time!!

  10. #10
    Join Date
    Jul 2009
    Location
    Barnstaple, Devon, United Kingdom
    Posts
    2,533

    Default

    All I can remember from my shed days is the condensation - lots of windows cos I wanted it bright; how stupid can a woman get

    Do you have a solution for that one Bee - and your shed sounds exactly the sort of place I'd like to work. Love the idea of the patchwork carpet
    Di x

Similar Threads

  1. Madness in the Workshop.
    By Dennis in forum Hot Metal ~ Gold, Silver & Metal Working
    Replies: 8
    Last Post: 27-06-2010, 07:34 PM
  2. My studio/workshop
    By lynnm in forum The Lounge
    Replies: 7
    Last Post: 25-01-2010, 10:12 PM
  3. Not an Official Workshop but...
    By Di Sandland in forum Jewellery Courses
    Replies: 27
    Last Post: 06-12-2009, 07:32 AM
  4. Save up to 25% on Workshop Essentials
    By apike in forum The Grapevine
    Replies: 1
    Last Post: 08-09-2009, 11:48 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •