Results 1 to 10 of 11

Thread: "Twig" effect ring help

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Aug 2015
    Posts
    9

    Default "Twig" effect ring help

    I am seeing "twig-like" rings becoming regular and I have a great idea to use this look, but I can't seem to get the look right.

    Could anyone give any advice on how they create the branch effect for a ring - is it a mould, or freehand? I am self taught in everything but can't seem to find any books or sites with this technique.
    I've attached an image of a similar look I'm going for which I have found in a store.

    thanks
    Attached Thumbnails Attached Thumbnails image.jpg  

  2. #2
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,845

    Default

    Don't know how that one was done, but I should experiment in silver first.

    It might have been carved in wax, or acrylic sheet and then cast.

    Personally I would carve it from wire, using burrs and then form the ring and add a twig and some claws. Start it using about 6.0cm of 2mm round wire and a cross cut cone burr, such as Cookson 979 054. If the result is too crisp, reticulate the surface by playing a small flame over it until the surface just melts and crinkles.

    You will go through several pieces of wire and other types of burrs before you are satisfied, but the result can then be fairly described as your own version. Dennis

  3. #3
    Join Date
    Mar 2011
    Location
    Manchester UK
    Posts
    937

    Default

    You can actually cast a twig. If you would need to find a suitable one and shape it to a ring shape then invest it when because its organic it would be burnt out leaving a void that can be filled with metal. The claws could be added with wire later
    I did try to make one in cad a while back but it wasnt that clever you cant beat mother nature



  4. #4
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,845

    Default

    I did think later as a low tech idea, that if you soaked a piece of twig, shaped it to size around a ring stick and tied it with thread or the thin wire from a bunch of saw blades, you could press it into cuttlefish and cast a shank.

    It would certainly have a rustic look. There are several tutorials about cuttlefish on U-Tube. Dennis.

  5. #5
    Join Date
    Nov 2014
    Location
    Cheshire
    Posts
    359

    Default

    Using cuttlefish to cast, would it be possible to just cast the twig as it is, and then aneal and bend to ring shape afterwards in the same way as you would make one normally from wire/sheet? Or do cast items behave differently?

  6. #6
    Join Date
    Mar 2011
    Location
    Manchester UK
    Posts
    937

    Default

    Yes good idea it would be possible

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •