Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Copper coloured solder

  1. #1
    Join Date
    Feb 2016
    Location
    East Anglian
    Posts
    633

    Default Copper coloured solder

    Hi being very new to jewellery making I am experimenting and practising using copper before launching out seriously into silver and beyond. I have made a number of copper rings and pendants and am very happy with the results. But, however close the joint there is always that thin line of silver and I would like to avoid that if possible. Is there a lead free, jewellery grade copper or copper coloured solder available? If so, where can I get some. I have looked on Cooksons site but found none. Any brass coloured solder as I am about it?!
    David.
    Last edited by Ruedeleglise; 06-03-2016 at 09:39 AM.

  2. #2
    Join Date
    Aug 2010
    Location
    England
    Posts
    1,902

    Default

    I have never seen a copper coloured solder David, most copper jewellery is either coloured or plated after completion, I think the only way to avoid solder lines on copper jewellery is to weld the joints rather than solder them.
    Get into using silver as soon as possible is my advice.

    James

  3. #3
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,841

    Default

    There is copper coloured solder here, which I am about to order, for a temporary non precious project. Perhaps whoever tries it first can report on the forum.
    https://www.etsy.com/uk/listing/2277...FS8z0wodUssKNQ

    The U-Tube Demonstration I find hilarious. https://www.google.co.uk/search?q=ww...j5BYveU9TXk_AE.
    Dennis.
    Last edited by Dennis; 06-03-2016 at 11:02 AM.

  4. #4
    Join Date
    Jul 2009
    Location
    Romsey
    Posts
    5,253

    Default

    I've got some similar phos-copper brazing rod; it's still not a terribly good colour match but that doesn't mean this one is the same.
    I know of no truly copper-coloured alloys that'll work; if you want a copper joint then TIG welding is the way to go, per James' comment.

  5. #5
    Join Date
    Feb 2016
    Location
    East Anglian
    Posts
    633

    Default

    Thanks for your replies. I like the idea of playing about with copper before launching into silver in all but the smallest way, as it obviously gives me the chance to practice basic skills and also experiment without the fear of wrecking good silver!

  6. #6
    Join Date
    Jul 2009
    Location
    cotswolds
    Posts
    3,383

    Default

    I have copper wire solder, which isn't a great colour match at all and can be tricky to use without ending up with great big blobs in the wrong places, but have recently been using this - http://www.alchemyandice.com/copper-...e-soft-x1.html (which comes in a 30g tube not the little 10g shown in the picture) and is actually not bad at all in terms of both colour and ease of use. It's certainly a little more silvery, but files back pretty well and is very easy to use, especially for smaller components. It's also a lot cheaper than using silver solder for non-precious projects.

  7. #7
    Join Date
    Feb 2016
    Location
    East Anglian
    Posts
    633

    Default

    Thanks George....have ordered a tube and will enjoy experimenting.

  8. #8
    Join Date
    Aug 2010
    Location
    England
    Posts
    1,902

    Default

    David, as you are working in copper, have you tried hammering copper shapes in a lead block, if you check out this old posting;http://www.cooksongold.com/forum/showthread.php?t=4802 In my time I have made a quite a few flowers and I always experiment when making my designs and flower constructions using copper before committing to precious metals. I mention this because the flower heads are usually held together using threads and nuts, I thread the flowers stems and make the central flowers stamens into nuts. Something a horologist would understand.

    I have posted this before but can't find the link.

    Click image for larger version. 

Name:	30m Dog Rose design to finish sheet.jpg 
Views:	23 
Size:	56.7 KB 
ID:	8755

    James

  9. #9
    Join Date
    Dec 2014
    Location
    South Australia
    Posts
    1,844

    Default

    Have look at this I have used this method http://www.onlinejewelryacademy.com/...ing-video.html

  10. #10
    Join Date
    Feb 2016
    Location
    East Anglian
    Posts
    633

    Default

    Thanks. That is amazing. I will try that once I have some spent pickle solution!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •