Quote Originally Posted by Dennis View Post
Very pretty pieces, but I don't understand where the disks could stick, if you bash all the way through over a gap. The punches stick in the remaining metal though, but can also be knocked through with a rod or big nail, over a gap as before.

Example of gap: space between two pieces of wood, hole in wood, partially open vice. Dennis.

It's not the disk's that get stuck it's the remaining metal in the cutter that gets a bit bent and I have a job to pull it out. Maybe it will come with practice, I try and give it the hardest bash I can to get it through in one go but sometimes it takes two or three. I think I'll try china's suggestion and place a piece a bit in the gap and see how that goes.

Thanks for the advice.