Aw thank you Daisy :-) xx
Sent from my iPhone using Tapatalk
Aw thank you Daisy :-) xx
Sent from my iPhone using Tapatalk
Do your lines either:
1. Not appear on the plate at all?
2. Appear, but wash of when you are cleaning the plate after exposing it?
Hi Lucie, don't appear at all :-(
Sent from my iPhone using Tapatalk
They need to be a minimum of 1mm thick, so your hand print image can't be too tiny and the image needs to be "REALLY" black.
You would generally get a better image on a larger hand print pendant, than you would on a tiny hand print bead.
Is the rest of your hand print a good depth? You can get different depths of polymer plate, but they would all require you to play around with the timings on your UV box.
Mine only need 30 seconds, but different boxes vary a lot!
The guys over at Metal Clay UK might be better at solving specifics. http://www.metalclay.co.uk/
Thank you very much x
Sent from my iPhone using Tapatalk
Bookmarks