bezel and cutting it to the right length

[Milomade]

Ok - So how does everyone measure their bezel strip when wanting to set a stone? I'm a beginner and using small buttons instead of stones and finding it really fiddly winding the bezel strip around the button and doing it that way - surely there's a better way to do it that's more acurate and less fiddly.

[MuranoSilver]

Hmm you could use one of those plastic ring sizers that cooksons sell
(they're white plastic slidy things) Measure the size with that then flatten it out & cut the strip to the length it measured. You'd still have to wind it round the button eventually though (as you'd need to shape it prior to soldering the seam and attaching it to whatever base you're using)...

Nic x

[Milomade]

that's a good idea - would probably have to make my own though as the buttons a smaller than teh average finger...I could even use a bit of old measuring tape.

Thanks!
Problem solved.

I've got 40 buttons to do this w/e, so that's going to help a lot.

[agent_44]

I measure the diameter of the stone if it is round, then calculate the circumference from that and then the really technical bit, I add a smidge on to account for the thickmess of the bezel strip! You've then also got a bit of leeway to file down to a perfect join for soldering.

[amazingbabe]

Hi was wondering can anybody share with me what size sheet silver they use for the back of a bezel????

[The Bijou Dragon]

Hi was wondering can anybody share with me what size sheet silver they use for the back of a bezel????

I sa on another thread Murano Glass said most people use .5 but she uses .7 (I think)

As for the question, a simple strip of paper will do the job. Cut a 5mm wide strip of paper, wrap around the gem snugly (but not too tight), mark where the ends overlap, cut and voila...the size of the stones circumference