Favourite and unusual tools

[CJ57]

Something else I have learned from you guys.

You would ideally need a draw bench such as the one Dennis made or a bought one re his Cookson link but they take up a lot of room. It will need a bit of welly to fix the plate in a vice and do it by hand without the use of a turning/ pulling mechanism

[ps_bond]

This takes up much less room in storage - http://www.meevis.com/jewelry-making...draw-bench.htm
Mine's similar, but I used rectangular tube for the body.

[Patstone]

Think I will stick to buying wire, I don't make enough to justify buying one. Plus of course I work in my spare bedroom.

[Unhindered]

I just use a vice and pull but it's not ideal! I miss my drawbench at uni