Results 1 to 3 of 3

Thread: Hammer hand pieces for pendant motors

  1. #1
    Join Date
    Nov 2011
    Posts
    43

    Default Hammer hand pieces for pendant motors

    Hi,

    Does the hammer hand piece fit onto a normal pendant motor with the usual cirucular action? I'm confused about how the hammer action can occur with a rotary action motor?
    Does anybody know how to know if it'll fit into an existing pendant motor - I'm looking at the Badeco one.

    Thanks!

  2. #2
    Join Date
    Mar 2011
    Location
    Manchester UK
    Posts
    766

    Default

    The hammer works from the circular motion, I presume its like a cam system. You also need to make sure the fitting is correct for your pendant drill there are different of types.

  3. #3
    Join Date
    Aug 2010
    Location
    England
    Posts
    1,899

    Default

    Providing your pendant drill has a slip joint connection the Badeco should fit and work OK, hammerheads are designed to work from a rotary action pendant drill. I use a Faro hammerhead handpiece on my pendant drill and it is very useful.

    James

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •