Results 1 to 3 of 3

Thread: Engraving machines

  1. #1
    Join Date
    Aug 2009
    Location
    Orkney
    Posts
    40

    Default Engraving machines

    Hi folks.

    I'm looking to invest in an engraving machine. Has anyone got any experience of any of these that they would be willing to share? I quite like the Gravograph ring cube but would also like to engrave on flat things too.

    Any advice would be appreciated,
    Ally

  2. #2
    Join Date
    Jul 2009
    Location
    Cornwall
    Posts
    3,172

    Default

    I've got the Gravograph ring cube and the M20. Both work well, though they can be a bit temperamental at times - usually when I've got a stack of things that have to be posted that day! I think you can get an attachment to use on the M20 which will engrave rings. The only thing against the M20 is that you don't get an instruction manual, so after the initial demonstration you have to work a lot of it out yourself.

  3. #3
    Join Date
    Aug 2009
    Location
    Orkney
    Posts
    40

    Default

    Thanks for that Carole. Does the M20 do the inside of bangles or just rings?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •