Results 1 to 10 of 10

Thread: Suppliers - White Gold

  1. #1
    Join Date
    Sep 2012
    Posts
    67

    Default Suppliers - White Gold

    Ladies and Gents,

    I am ashamed to say that i seem to only decend on this website when i need help, and thus far feel really guilty for being a poor excuse for a member, especially when you guys ALWAYS help me without question...

    Thus forth i have another favour to ask...

    I am struggling to find a supplier of 18ct white gold of the required size, 3x2mm.

    Ive looked at Cookson, but they only supply 3x3mm and this have mocked up a silver version of the ring, is a tad large hight wise.

    So question is, does anyone know of a supplier?

    Many thanks as usual guys it is always appriciated....(kissing tush too much now?!?!? ) cheers

    Toni

  2. #2
    Join Date
    Jul 2009
    Location
    Romsey
    Posts
    5,256

    Default

    What shape?

  3. #3
    Join Date
    Aug 2010
    Location
    England
    Posts
    1,902

    Default

    Sorry to state the obvious, if you are after a flat strip for a ring, Cookson do sell 2mm. thick sheet in 18ct white. So why not just order a 3mm wide strip.

    James

  4. #4
    Join Date
    Sep 2012
    Posts
    67

    Default

    Quote Originally Posted by Goldsmith View Post
    Sorry to state the obvious, if you are after a flat strip for a ring, Cookson do sell 2mm. thick sheet in 18ct white. So why not just order a 3mm wide strip.

    James
    i asked if they would do that, but they do a min of 5mm or 1cm i cant remember now

  5. #5
    Join Date
    Sep 2012
    Posts
    67

    Default

    Quote Originally Posted by ps_bond View Post
    What shape?
    3x2mm so rectangular...

    considered dome, but unsure about the stones been secure enough

  6. #6
    Join Date
    Jul 2009
    Location
    Romsey
    Posts
    5,256

    Default

    Hmm. The system seems to accept 3mm as a width; are you sure that's not a length limitation? If you get really stuck, there's always the option of rolling down some 3mm wire (although it will widen fractionally) - I can do that if you don't have anyone close who'll do it.
    One thing to remember with the sheared pieces is that there's invariably some edge distortion.

  7. #7
    Join Date
    Sep 2012
    Posts
    67

    Default

    Quote Originally Posted by ps_bond View Post
    Hmm. The system seems to accept 3mm as a width; are you sure that's not a length limitation? If you get really stuck, there's always the option of rolling down some 3mm wire (although it will widen fractionally) - I can do that if you don't have anyone close who'll do it.
    One thing to remember with the sheared pieces is that there's invariably some edge distortion.
    Ive found the email, and the smallest width is 5mm, which is too expensive.

    3mm wire, would that leave it with curved edges?

  8. #8
    Join Date
    Jul 2009
    Location
    Romsey
    Posts
    5,256

    Default

    Quote Originally Posted by Toni View Post
    3mm wire, would that leave it with curved edges?
    Very slightly, yes - could either be tapped square, filed square or left alone as a design element. I'd probably make up the ring then sand the edges square if they needed it.

  9. #9
    Join Date
    Sep 2011
    Posts
    1,086

    Default

    Betts has 3x1.5 in 18ct white gold
    http://www.bettsmetalsales.com
    Author: Pearls A Practical Guide
    www.pearlsapractical.guide
    www.Pearlescence.co.uk

  10. #10
    Join Date
    Sep 2012
    Posts
    67

    Default

    Betts look pretty good.....

    thank you

    Peter as usual thank you for your help, if i have no luck with betts i may require your assistance with rolling the 3mm wire

    Much appriciated as always peeps...ill show you the finished product

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •