Results 1 to 4 of 4

Thread: Resin Curing

  1. #1
    Join Date
    Aug 2012
    Posts
    15

    Default Resin Curing

    Hi everyone!

    Not sure if this is the right place to ask a question but I had so much help with my last question I thought I would give it a try!

    I work in an outside studio which gets very cold during the winter (its basically like a shed!) Ive been making things with resin in the summer which all worked well but I am worried now that the temperature is dropping my resin wont cure when I leave it overnight. Is it true that resin doesnt cure properly in cold temperatures? I will put a radiator on while I am in there working but cant leave it on overnight.

    Any advice really appreciated!

    Thanks
    Antonia

  2. #2
    Join Date
    May 2012
    Posts
    373

    Default

    Hi Antonia.
    I've done quite a few projects involving resin, but all my projects have been on small pendants so they cure quicker. What size scale are you talking?
    Usually, I set mine in the outside shed for around 8 hours. I then bring in indoors and set the project tray of resin items under my work lamp which disipates a low heat directed to the tray, helping them along the way.
    Normally I keep all resin projects for the summer though because I'm so paranoid about the fumes etc, I only bring the tray inside when the resin is half hard and use the lamp to finish them off so they can be worked with that night.
    I do remember reading somewhere to keep resin away from extremes of heat and cold, and they reccomended the gentle, even heat (which my lamp gives) to help with the curing process.

    I found an information page that I hope will help you, it gives information about how to use resin in colder conditions.
    http://www.westsystem.com/ss/cold-temperature-bonding/
    Sian Williamson

  3. #3
    Join Date
    Jul 2009
    Location
    cotswolds
    Posts
    3,385

    Default

    Are these the chemset resins?

    If so, then they definitely like to cure in a warm place. I use the top of my Aga, but when I was taught by Clare John, we put our pieces on a food warmer (the sort with a couple of tealights at the bottom). Are you able to bring pieces indoors overnight?

  4. #4
    Join Date
    Aug 2012
    Posts
    15

    Default

    Thank you for your help! I am making small items like pendants so they should cure ok! Good tip about using the top about the Aga, I will try and bring them in at night and try that!

    Thank you again

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •