Polymer (?)

[lynnm]

I got out my clay today (Have had it for years and never opened the packets but short on silver) and had a play... can someone tell me please about findings? Is it ok to push them in before cooking? One of the packets is fimo and it is really dry.... breaking up real bad. Is it normal or is it out of date? Any advice would be appreciated

[surfergirl]

Hi Lynnm

I've not done much in the way of polymer clay but am planning on doing so soon and have been researching quite a bit....polymer clay will not stick to anything apart from itself so...yes you can stick findings in but, depending on what kind of finding it is (perhaps a straight eyepin) you'll need to remove it after curing (cooking) and stick it back with a cyanoacrylate glue (super glue).

If the finding had something on which the clay could lock around (a loop on the end of an eyepin) you wouldn't need to use glue - although in addition you could use liquid polymer clay (needs cooking) for added strength.

I've been using FIMO I bought over 12 years ago! It was also very crumbly and hard. I had to condition (knead it with hands, roll it, squish it) for quite a while before it could use it as a lump and well... due to my impatience with all the conditoning, I formed and cooked it when it really could have done with a bit more conditioning. I made molds/stamps which turned out surprisingly well though - quite strong and the resulting lines were crisp. I would use old clay like that for molds,stamps and texture plates rather than wearable pieces as, after cooking - 'plaquing' (white, moon like flecks) was quite prevalent. I think that was more to do with not conditioning for long enough (although some brands of clay are prone to this - FIMO being known for this) Many use a pasta machine for that - I don't have one. Plaquing can be desireable, however, if making faux stones like rose quartz, amber or jade. Plaquing is less visable if using a more opaque colour.

I've not tried any other brands of clay - have just done some experimenting, so hopefully someone with more experience will post!

FYI - Craftyarts have a sale on FIMO at the moment - I just ordered from them - free delivery over £25 and quick too.

What are you planning to make?

[lynnm]

Thanks for the reply I have no idea what I want to make to be truthful, so many things come to mind. I made some 'cakes' yesterday and used a mould I have (first time of using that to!) I do have a pasta machine so I am quite lucky. The Sculpey was easy to condition but I played a while with the Fimo before putting it through. Well I tried to put it through the machine but it just crumbled. maybe I will get hubby to have a go at conditioning! Like the idea of making my own moulds though so will have a go at that! My oven is a combi microwave that I was given so I am testing the cooking today, will let you know how it goes!

[moodlemoo]

hey lynnm

i've done a lot of polymer clay work with fimo and i've found if it is really crumbly pass it through your pasta machine about 10 times squeezing the pieces together inbetween passes.

As to incorporating finding into your pieces i tend to add them to the soft clay before baking. i use simple silver-plated wire and it has come out fine, and still shiny as the oven doesn't get high enough to damage it. it also means your findings are properly secured and you don't end up stuck to your piece with superglue (happens everytime for me).

hope this helps!

[lynnm]

thanks for the reply. I had fun with the fimo but to be honest the biggest problem since is the white goes a horrible colour... am I overcooking do you think? If I wanted to use what i made with the white i would have to paint it :/

[moodlemoo]

i've never had any trouble with the white, but have u tried testing the heat of your oven? some ovens can vary by 10 degrees or more and this could cause your clay to scorch and change colour