Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Fitting bezels to curved surfaces

  1. #1
    Join Date
    Jul 2009
    Location
    Romsey
    Posts
    5,256

    Default Fitting bezels to curved surfaces

    Haven't done any tips in a while, so...

    Here's one way of making bezels fit to curved surfaces - such as large cabochons onto cuff bracelets, for example.

    When making up the bezel, I tend to install a heftier piece of metal than normal for the bezel shelf. I do this primarily to support the structure of the bezel during the subsequent filing. The shelf needs to support the stone clear of the surface, so make sure there's plenty of depth to it - you can take it away easily, adding it back is trickier.

    I invariably file a rough curve into the bottom of the besel at this point.

    Using engineer's marking (not layout) blue - or Prussian blue oil paint, it's got a fair few similarities - I put a thin smear across the curved surface, then touch the bezel to it. Where the metals contact, there will be a blue mark left on the bezel. File it away... Repeat this until the entire bottom of the bezel shows blue and you will have a perfect fit.

    Then clean it all up. The blue does like to get everywhere!

  2. #2
    Join Date
    Jul 2009
    Location
    Market Deeping
    Posts
    2,693

    Default

    Great tip -I've even got Prussian Blue lol
    nic x
    Monthly FREE entry giveaways on Blogs!
    Shop Blog: http://muranosilver.blogspot.com/
    Silver Clay Blog: http://pmctips.blogspot.com/
    View images of my work on Flickr: http://www.flickr.com/photos/muranosilver

  3. #3
    Join Date
    Jul 2009
    Location
    cotswolds
    Posts
    3,383

    Default

    I use articulating strips from a dental supply company for things like this - the ones they make you bite on to check how a filling fits?

  4. #4
    Join Date
    Jul 2009
    Location
    Romsey
    Posts
    5,256

    Default

    I know the ones - there's also Seat Check powder (can't remember the correct dental name for it offhand); it burnishes to a colour change where the contact points are - it's designed for crown fitting IIRC, but works well for stone setting.

    I don't think the dentists would be popular using marking blue to check fit though...?

  5. #5
    Join Date
    Jul 2009
    Location
    cotswolds
    Posts
    3,383

    Default

    Quote Originally Posted by ps_bond View Post

    I don't think the dentists would be popular using marking blue to check fit though...?
    LOL at the idea though

  6. #6
    Join Date
    Jul 2009
    Location
    Chepstow
    Posts
    1,072

    Default

    I get Peter's method but not your's George; how do you use the strips? What are they? Does the metal to metal cut straight through it? I don't think I've seen or used these strips at a dentist.

  7. #7
    Join Date
    Jul 2009
    Location
    cotswolds
    Posts
    3,383

    Default

    Quote Originally Posted by Ominicci View Post
    I get Peter's method but not your's George; how do you use the strips? What are they? Does the metal to metal cut straight through it? I don't think I've seen or used these strips at a dentist.
    Articulating strips are the blue one side/red the other thin strips that you get asked to 'tap' your teeth together onto to check if a filling/crown/whatever, fits properly. They do the same for metal - where the two parts touch they'll leave a blue mark on one side and a red one on the other. Just enough to see where to file.

  8. #8
    Join Date
    Jul 2009
    Location
    Romsey
    Posts
    5,256

    Default

    Funnily enough, this seems to be a current discussion on Ganoksin too. One of the more useful tips I've seen so far is to use a piece of abrasive paper held on top of the bracelet to make a scratch pattern on the bezel to check for fit.

  9. #9
    Join Date
    Jul 2009
    Location
    Bristol
    Posts
    879

    Default

    Sounds like it could be a little less messy
    Lucinda

  10. #10
    Join Date
    Jul 2009
    Location
    Wexford Ireland
    Posts
    479

    Default

    hmmmmmmmmmmmmmm, interesting !!!!

Similar Threads

  1. soldering small bezels
    By Trish in forum Need Help? Ask the Experts!
    Replies: 6
    Last Post: 27-05-2010, 04:41 PM
  2. A Mini Lightbox for Tricky Bezels.
    By Dennis in forum Gemstones and Gem Setting
    Replies: 8
    Last Post: 22-01-2010, 06:02 PM
  3. A Mini Lightbox for Tricky Bezels.
    By Dennis in forum Tutorials, Bench Tips and Step By Steps
    Replies: 8
    Last Post: 22-01-2010, 06:02 PM
  4. Bezels and Colletts
    By amberdragon in forum Customer Service
    Replies: 0
    Last Post: 31-08-2009, 04:47 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •