Results 1 to 5 of 5

Thread: Wire?

  1. #1
    Join Date
    Jul 2009

    Default Wire?

    Hello y'all, N00B here.

    I've done a bit of silversmithing but not any beading and my mum's on at me to re-thread a necklace of hers and as stoopid as it sounds I don't really have a clue as how to go about it.

    Any tips on what sort of wire or thread would be suitable for huge beads and is it really as simple as just stringing them or is there some special double, triple and quadruple knotting technique I need to know?

    I want to do it, but I don't want to screw it up and have her beads break and fall everywhere.

    Any ideas?

    Thank ye!

  2. #2
    Join Date
    Jul 2009


    What are the beads made of, and what are they strung on already, and how old is it?

    If it is pearls then it might be better done by a specialist.

    If it is quite an old necklace simply strung on thread then you may be able to do it straight onto a beadalon wire - this wouldn't have been around a few decades ago.

    Some different descriptions of threading materials are here Making It is an American site hence the spelling, but some useful stuff on there if you have time to look around. Not sure if they then go on to tell you how to use each stringing material, but if you did a search you would probably find something.

    Anyone else any ideas?

  3. #3
    Join Date
    Jul 2009
    Market Deeping


    Yep what Ominicci said - (nice link)

    Hope it all goes well and you do it all Ok for her
    Nic x
    Monthly FREE entry giveaways on Blogs!
    Shop Blog:
    Silver Clay Blog:
    View images of my work on Flickr:

  4. #4
    Join Date
    Jul 2009
    West Midlands


    I use Beadalon 49 strand wire either .015 or .018 diam. Its strong and gives a lovely drape to jewellery, which I secure using crimp beads, or if its a multi-stranded necklace, then I feed the pieces of wire into a callotte, which I then crimp & glue. Just make sure you use the thickest diameter wire you can, so that it fits snugly, but not tightly, into the beadhole, rather than leaving a gap. Check out the Beadalon sites faq's for more tips - they mention two reasons why necklaces break, one is making a necklace too tight (you need to make sure there's a bit of give, but not too much that there's a big gap between beads), and the other is using a wire that leaves a big gap when it goes into the beadhole. (Does that make sense?). My fingers don't go quick enough to match my thinking!!

    Good luck with the project - you're welcome to ask as many questions as you like. (having written that, its probably confused you even more!)...?

    jules x

  5. #5
    Join Date
    Jul 2009


    Quote Originally Posted by Ominicci View Post
    What are the beads made of, and what are they strung on already, and how old is it?
    I think they're ambroids (Little pieces of amber squished together to make bigger pieces of amber). I don't know what they're strung on, and, more to the point I don't even know where they are - they've completely disappeared! First task, find necklace. They were re-strung professionally a few years ago but have since frayed or whatever

    Thanks all for the tips...especially MuranoSilver, I'd be lost without your input

Similar Threads

  1. What Wire?
    By louise2812 in forum Need Help? Ask the Experts!
    Replies: 6
    Last Post: 04-09-2010, 10:10 AM
  2. what thickness wire?????
    By Rustic Charm in forum Tutorials, Bench Tips and Step By Steps
    Replies: 5
    Last Post: 25-07-2010, 09:08 AM
  3. Filing wire???
    By shelliem in forum Maille and Wirework
    Replies: 21
    Last Post: 07-11-2009, 02:04 PM
  4. How do you straighten your wire
    By Petal in forum Maille and Wirework
    Replies: 18
    Last Post: 18-09-2009, 09:25 AM
  5. D-shape wire
    By SilverDee in forum Jeweller's Wishlist
    Replies: 0
    Last Post: 08-07-2009, 04:19 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts