Results 1 to 2 of 2

Thread: Cloudy silver

  1. #1
    Join Date
    Feb 2024
    Posts
    1

    Default Cloudy silver

    Hello! I have enamelled a sterling silver piece but when polishing it, it looks cloudy and I'm really struggling getting it to look clear.

    I have used wet and dry as well as my radial disks but it doesn't seem to budge. Thinking this is fire stain from firing it in the kiln but surely that can be sanded off.

    Any suggestions appreciated!

    Heidi
    Attached Thumbnails Attached Thumbnails PXL_20240311_154619897.jpg  

  2. #2
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,904

    Default

    Well, there are lots of scratches on it. To get a mirror shine on silver, you must faithfully get the best shine you can with each grade of whatever system you are using, and then rotate by 90°before going on to the next grade.

    Obviously this is best taken as far as possible before the final firing.

    I would suggest about four grades of micro-mesh sheets for this, as they have a soft backing and will conform to the curve: for instance 2400, 3600, 6000. and 8000. You can finish if you wish with Silvo wadding and a soft cloth, or a swans down mop and rouge. Then washing up liquid.

    https://www.google.com/search?client...brasive+sheets Dennis

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •