Which Butane Torch is best?

[TheYorkshireJeweller]

Hi
Am looking to get a handheld butane torch to use at home and wondered if anyone could advise which is the best between the following available from Cooksongold:

Dremel Versaflame Butane Blow Torch With Accessories

Jewellers Soldering Hand Torch Butane Blow Torch

Unfortunately I cannot post the URL as I am too new a member.

Thanks


Sent from my iPhone using Tapatalk

[nicks creative stuff]

If it was me I would be buying the basic jewellers soldering torch. I find the Dremel a bit gimmicky having to pay more for the accessories and case that I would probably never use.
Another thing I don’t like about the Dremel is all the extra buttons, for me a safety switch first it’s totally unnecessary and annoying if doing a lot of quick repetitive jobs like chain making. In the UK B&Q stock the Dremel so you can have a look first … N

[Dennis]

Hi Yorkshire, and welcome to the forum.

As you probably know, the power of a torch is related to the size of the burner, and the gas used.
So while beginners usually start with a re-fillable micro torch, which can be used for soldering small items, such as chains, jump rings, thin rings and small pendants, they soon find they struggle and fail with heftier items.

So if you are not ready to invest in something more sophisticated, I would suggest you buy a Proxxon Microflame, followed by a Max Flame torch, both available from Cookson.

Armed with these, if needs must, you can use them tigether, one in each hand, to add some power if solder does not flow.
Here is a page to browse for more general information.
https://www.google.com/search?client...ih=631&dpr=1.5
Dennis.

[TheYorkshireJeweller]

Hi Yorkshire, and welcome to the forum.

As you probably know, the power of a torch is related to the size of the burner, and the gas used.
So while beginners usually start with a re-fillable micro torch, which can be used for soldering small items, such as chains, jump rings, thin rings and small pendants, they soon find they struggle and fail with heftier items.

So if you are not ready to invest in something more sophisticated, I would suggest you buy a Proxxon Microflame, followed by a Max Flame torch, both available from Cookson.

Armed with these, if needs must, you can use them tigether, one in each hand, to add some power if solder does not flow.
Here is a page to browse for more general information.
[
Dennis.

Thanks so much Dennis! I know that these micro-torches lack power, but don’t feel ready for a set up involving large tanks yet.
You have given me something to think about so I will look at the link you sent.

What would your recommendation be (not using propane) if I went for something other than these hand-held torches, so it lasts me a bit longer in my progression?

Much appreciated


Sent from my iPhone using Tapatalk

[china]

( not using Propane ) The torches you are considering use Propane, if you do not want to invest in tanks and use something like a Smiths Little Torch then you are limited to the small hand torches that you have already mentioned, which are a compromise at best.

[misspond]

Hi, I have four butane torches and I use the one that best suits the job. My smallest torch from Cooksongold is great for jump rings, balling ends of wire and other small jobs. My most used torch is a cooks torch that Lidl sell occasionally, next one up is a large cooks torch from a kitchen supply place (Nisbetts I think) and then I have a fine flame Go-System torch with butane/propane from B&Q. The Go System is good for chunky things and bangles.

[TheYorkshireJeweller]

( not using Propane ) The torches you are considering use Propane, if you do not want to invest in tanks and use something like a Smiths Little Torch then you are limited to the small hand torches that you have already mentioned, which are a compromise at best.

Ok thanks. I was told it was Butane. Interesting.


Sent from my iPhone using Tapatalk

[TheYorkshireJeweller]

If it was me I would be buying the basic jewellers soldering torch. I find the Dremel a bit gimmicky having to pay more for the accessories and case that I would probably never use.
Another thing I don’t like about the Dremel is all the extra buttons, for me a safety switch first it’s totally unnecessary and annoying if doing a lot of quick repetitive jobs like chain making. In the UK B&Q stock the Dremel so you can have a look first … N

Thank you for your insight! I was leaning toward the basic jewellers torch


Sent from my iPhone using Tapatalk

[Ruedeleglise]

Rather late in on this post, but here’s my 2 pence worth!
For small bits I use a Proxon butane torch. Good pointy flame, easily regulated and light. Then I have a Sievert propane set up with 3 different burners. Number 1 is good for smallish work. The next a good all rounder which I use more and more. This can be really quite fierce and the third a right royal “volcano” of a burner that I have only used a handful of times. I would love to have a smiths little torch oxygen / acetylene but my home insurance doesn’t approve!
David.


Sent from my iPad using Tapatalk

[nicks creative stuff]

Hi David, I have the same sort of collection of gas torches as you however I do feel privileged in owning a smiths little torch … shame your insurer won’t allow an oxygen bottle.
Not sure what oxygen generators are like I think they will run a SLT although a lot more of a set up cost with them … N