Results 1 to 5 of 5

Thread: Gold Frosting Machine

  1. #1
    Join Date
    Jun 2020
    Posts
    67

    Default Gold Frosting Machine

    Hello guys ,
    Here is a video I made on gold frosting .
    I dont know what this process is known as ?
    Is this known as frosting?

    Also , How do you guys do this ?

    Here is the link
    https://youtu.be/xuvCerOl05M

  2. #2
    Join Date
    Jul 2009
    Location
    Romsey
    Posts
    5,263

    Default

    I'd call it stippling. I tend to regard frosting as using either a wire wheel or abrasive dust (blown or simply poured on).
    I've got a tip for the Foredom hammer handpiece that has a diamond flush set in it, pavilion out, for faceted stippling.

  3. #3
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,904

    Default

    Well, I suppose you could also call it texturing.

    A similar effect can be obtained with a small ball burr, made slightly excentric, by bending it while the neck is red hot.
    It is noticable that low carat gold, and sterling silver will tarnish much more quickly if treated in this way.

    The engraver can also be used turned right down, or connected to a resistance, or dimmer, to act as a burnisher for flush setting.
    A cheap alternatinve to a hammer handpiece, if you can stand the noise. Dennis.

  4. #4
    Join Date
    Jun 2020
    Posts
    67

    Default

    Okay,
    Thanks for your comment.
    Nice to know that.
    Thank you so much

  5. #5
    Join Date
    Jun 2020
    Posts
    67

    Default

    Hey Dennis,
    Thanks for your message.
    I totally aggree with you. Thank you so mnuch

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •