Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: Bezel pusher

  1. #11
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,845

    Default

    You will probably have to wiggle it more to make it as loose as possible first. Then try the sticky tape. Dennis.

  2. #12
    Join Date
    May 2017
    Posts
    33

    Default

    Thanks again - just while I'm on do you recommend a specific glue I have a few 2part epoxy including gorilla and E 1000 ?

    Sent from my SM-G780F using Tapatalk

  3. #13
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,845

    Default

    Yes, as the bullet is tapered you will need to use your pusher again after gluing, so that the edges don't stand away.
    So I would suggest a two part epoxy, used sparingly not to show, and slow enough to allow you to do some setting.
    Once it looks good, don't test for wobble until the resin has set.

  4. #14
    Join Date
    May 2017
    Posts
    33

    Default

    Aww thanks Dennis you're a star

    Sent from my SM-G780F using Tapatalk

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •