Hello guys,

Im a hobbyist silversmith and for past 3 weeks I cant succeed in delft clay casting. I purchased Orca jeweller propane torch, but it only melts to 15g of silver.

When I cast, the mould usually fills halfway. Ive learned from past 30 tries and countless youtube videos to make the pouring hole bigger like 4-5mm, I use small, borax glazed crucible, cast the ring from top, I prevent the heat from running away with a little 'house' from fireclay.

Ive come to a conclusion I will need a stronger, propane oxy torch to melt the silver, because for 8g silver ring, 16g seems to be not heavy enough to push in, and I need to melt about 27g.


I would greatly appreciate any advice if you have a recommendation for oxy propane torch in a relatively good price for a beginner.

Thanks!