Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Help with setting 1mm half cut seed pearls

  1. #1
    Join Date
    Feb 2021
    Posts
    3

    Post Help with setting 1mm half cut seed pearls

    Hi there - does anyone have any advice for the best way to affix 1mm half cut seed pearls into a cut-out channel within a 9ct gold and/or 18ct vermeil pendant?

    So far I have tested with an epoxy glue which appears to be holding well.
    However, given how tiny the pearls are, and my lack of experience - it's proving to be a messy endeavour. No matter how steady my hand, I always seem to get glue outside of the channel/ onto the pearls themselves.
    Is there a suggested tool for picking up/ placing the pearls?

    Any tooling or handiwork advice much appreciated!
    Thanks, J

  2. #2
    Join Date
    Feb 2011
    Location
    Scotland
    Posts
    3,437

    Default

    I think Wendy may suggest super glue but I’ll leave her to advise . Anything glue related I find wooden cocktail sticks really useful for small amounts

  3. #3
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,904

    Default

    Hello Jourdana and welcome to the forum. There is a choice of glues: Epoxy is slower to set, but requires two parts to be dispensed accurately and well mixed. Gel superglue is more convenient but grabs instantly making re-positioning a problem.

    Whichever you use, mix it or dispense it on a piece of clear plastic packaging.
    Then apply it very sparingly to the metal, with a needle in a holder, such as half a wooden chopstick, or with a sharp cocktail stick.

    The best tool for picking up pearls is a wax pencil used for nail art https://www.google.com/search?client...l+for+nail+art
    The point can be warmed and shaped with fingers.
    Once the pearl is in place don't touch, but press it home with a blunt stick. That way you will minimise any cleaning up.

    You will see I have the same problem with the chatons in my acrylics. Dennis.
    Attached Thumbnails Attached Thumbnails Black Cat.jpg  
    Last edited by Dennis; 23-02-2021 at 08:53 PM.

  4. #4
    Join Date
    Dec 2014
    Location
    South Australia
    Posts
    1,858

    Default

    I use one of this type to pick up small stones Pearls etc https://www.craftonline.com.au/produ...el-picker-tool

  5. #5
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,904

    Default

    Thank you Bob, I now found something similar on amazon UK, and have ordered it to try out: https://www.amazon.co.uk/s?k=Uchida+...f=nb_sb_noss_2.

    For glueing it's important to place the pearl or rhinestone precisely, or you have stray glue to clear up which is frustrating and time consuming, Dennis.

  6. #6
    Join Date
    Jan 2021
    Location
    Bristol
    Posts
    189

    Default

    Would clear silicon sealant work?

    I use it for attaching sea glass (which is heavy) to glass to make translucent sun catchers. The sealant dries clear so is invisible and but gives you plenty of time to rearrange things before it sets. It doesn't yellow and seems to last for ever.

  7. #7
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,904

    Default

    Certainly a novel idea, but needs testing.
    An immediate problem I can foresee is that it comes in large tubes and you only use minute amounts at a time. The rest might harden, before you need to use it again.

    Would like to see a sun catcher though. Dennis.

  8. #8
    Join Date
    Jan 2021
    Location
    Bristol
    Posts
    189

    Default

    Quote Originally Posted by Dennis View Post
    Certainly a novel idea, but needs testing.
    An immediate problem I can foresee is that it comes in large tubes and you only use minute amounts at a time. The rest might harden, before you need to use it again.

    Would like to see a sun catcher though. Dennis.
    Hobby/craft shops sell it in small glue sized tubes for this type of application. (I work a lot in mixed media hence my rather off the wall approach at times)

    The clear silica is waterproof too as less imaginative types just use it in the bathroom! I think it would work really well as a stone setting medium.

    For some reason all my picture uploads seem to fail?

  9. #9
    Join Date
    Dec 2014
    Location
    South Australia
    Posts
    1,858

    Default

    If you use Silicone I would suggest that use a neutral variety, (the type use for mirrors is neutral) the standard version may affect the metal.

  10. #10
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,904

    Default

    Quote Originally Posted by Caro View Post
    Hobby/craft shops sell it in small glue sized tubes for this type of application. (I work a lot in mixed media hence my rather off the wall approach at times)

    The clear silica is waterproof too as less imaginative types just use it in the bathroom! I think it would work really well as a stone setting medium.

    For some reason all my picture uploads seem to fail?
    That's sad, but don't give up. To be accepted, the file size needs to be reduced to around 700Kb, or less.
    My routine way of posting pictures is to Go Advanced, click on the paper clip, and go on as for an email attachment. The advantage is that you have the option of previewing your post before submitting.

    Just about to look for craft silicone now. Dennis

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •