Results 1 to 10 of 14

Thread: soldering mitres

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Feb 2011
    Location
    West Berkshire
    Posts
    632

    Default soldering mitres

    Hi - does anyone have experience of soldering mitres for a box? I have cut out 4 pieces and managed to solder 2 together but found it incredibly difficult to hold the mitres in place accurately. I secured a square charcoal block on a another block with holes and lined up the corners then put pins into the holes against the silver. Does anyone have other suggestions please? There must be an easier solution, surely? This is part of my learning curve making small silver boxes, this will be no. 7. (The others have been round, rectangular & square but I scored the last 2 to make the corners) Thanks guysClick image for larger version. 

Name:	P1090748.jpg 
Views:	11 
Size:	64.9 KB 
ID:	12889
    Last edited by theresa; 23-02-2021 at 11:33 AM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •