Results 1 to 3 of 3

Thread: Foredom SR pendant with H20 hand piece

  1. #1
    Join Date
    May 2020
    Posts
    8

    Default Foredom SR pendant with H20 hand piece

    I have the H20 handpiece for the Foredom SR I recently bought some attachments 3/32 but they are a little loose in the handpiece. Can I tighten the chuck or is there another solution?

  2. #2
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,217

    Default

    Yes, with the collet open, you need to unscrew the nose and inset a 1.5mm Allen key. Hold the shaft and turn the key clock wise a little. Test before replacing the nose.

    This video shows it, but you only need the very end manoeuvre for a small adjustment. https://www.youtube.com/watch?v=hnM1u4Wuf-A Dennis.

  3. #3
    Join Date
    May 2020
    Posts
    8

    Default

    Thank you so much, I thought I had damaged the handpiece !! Now to buy a 1.5mm Allen key ......

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •