Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: laser cutting

  1. #1
    Join Date
    Aug 2016
    Posts
    37

    Default laser cutting

    Hi all,
    Been having fun with a new toy (cheapo laser cutter)
    a few pairs of earring experiments.
    Attached Thumbnails Attached Thumbnails IMG_5241.jpg   IMG_5242.jpg   IMG_5217.jpg   IMG_5218.jpg   IMG_5233.jpg  


  2. #2
    Join Date
    Feb 2011
    Location
    Scotland
    Posts
    3,392

    Default

    Tell us more Rich! How cheap and what materials can it do?

  3. #3
    Join Date
    Aug 2016
    Posts
    37

    Default

    Hello Caroline,
    I paid £ 200 for the machine on gumtree , its one of those 40w Chinese made ones. The earrings in the images are 3mm acrylic , cuts easily. 3mm mdf also cuts easily. I have experimented with 2mm thick leather with varying degrees of success.
    p.s I know £200 is not peanuts , but a 'proper' machine is thousands.
    Cheers,
    Richard.

  4. #4
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,845

    Default

    That's a stunning result. Are there safety concerns? Dennis.

  5. #5
    Join Date
    Feb 2011
    Location
    Scotland
    Posts
    3,392

    Default

    Quote Originally Posted by RichL View Post
    Hello Caroline,
    I paid £ 200 for the machine on gumtree , its one of those 40w Chinese made ones. The earrings in the images are 3mm acrylic , cuts easily. 3mm mdf also cuts easily. I have experimented with 2mm thick leather with varying degrees of success.
    p.s I know £200 is not peanuts , but a 'proper' machine is thousands.
    Cheers,
    Richard.
    The precision seems great. A friend who was an art teacher in a high school said one day oh our technicians could cut that for you with the laser cutter.What laser cutter, what technicians in an art dept.
    One that cut metal would be my preference but that’s a different matter!

  6. #6
    Join Date
    Jan 2019
    Posts
    76

    Default

    Quote Originally Posted by CJ57 View Post
    The precision seems great. A friend who was an art teacher in a high school said one day oh our technicians could cut that for you with the laser cutter.What laser cutter, what technicians in an art dept.
    One that cut metal would be my preference but that’s a different matter!
    If it is computer-controlled, for me it does throw up the whole debate on craft. The results are very impressive but my pleasure in both creating and appreciating the work of others is in the creation by hand. At what point does something not become art? After all, the original needs to be designed. Also, is the work of Rembrandt and other greats lessened by the chunks carried out by assistants? And what is the difference between a disc or star cut by a laser compared with a disc cutter and hammer? I really don’t know.
    I am a retired architect and worked with one of the first firm to use CAD. It was a godsend in the creation and amending of drawings but the building of the final result was by the craft of bricklayers, joiners, decorators etc. Of course, prefabrication is becoming more extensive. Again, the craft is in the original design work.
    Where are these thoughts going in respect of a laser cutter? I’m not sure. It certainly has its place in the workshop and I would love to know your thoughts.
    Ian

  7. #7
    Join Date
    Jan 2019
    Posts
    76

    Default

    Quote Originally Posted by Ianfs View Post
    If it is computer-controlled, for me it does throw up the whole debate on craft. The results are very impressive but my pleasure in both creating and appreciating the work of others is in the creation by hand. At what point does something not become art? After all, the original needs to be designed. Also, is the work of Rembrandt and other greats lessened by the chunks carried out by assistants? And what is the difference between a disc or star cut by a laser compared with a disc cutter and hammer? I really don’t know.
    I am a retired architect and worked with one of the first firm to use CAD. It was a godsend in the creation and amending of drawings but the building of the final result was by the craft of bricklayers, joiners, decorators etc. Of course, prefabrication is becoming more extensive. Again, the craft is in the original design work.
    Where are these thoughts going in respect of a laser cutter? I’m not sure. It certainly has its place in the workshop and I would love to know your thoughts.
    Ian
    I have just reread this and I hope I have not give offence to the original post. The pieces shown are beautiful.
    Ian

  8. #8
    Join Date
    Feb 2011
    Location
    Scotland
    Posts
    3,392

    Default

    Quote Originally Posted by Ianfs View Post
    I have just reread this and I hope I have not give offence to the original post. The pieces shown are beautiful.
    Ian
    If you are creating the original then it’s part of the process. I make one off pieces that often can’t be afforded by some. A small run would be a solution especially with Perspex as you can never recover the time spent on cutting the damn stuff which I used a lot in the 70s/80s.
    The intricacy of these designs is quite liberating to me. It might be a problem for me though as I rarely put anything on paper and work evolves at the bench until it’s done. I’ve always shied away from mass production, even casting as I’d be bored and rarely do more than 3 on a theme but never the same. I’d probably be more likely to use it to cut out base shapes as a backdrop for silver work

    I see I attached this to the wrong quote from you but it’s still part of the broader conversation I think
    Last edited by CJ57; 15-12-2020 at 12:22 PM.

  9. #9
    Join Date
    Jan 2019
    Posts
    76

    Default

    Quote Originally Posted by CJ57 View Post
    If you are creating the original then it’s part of the process. I make one off pieces that often can’t be afforded by some. A small run would be a solution especially with Perspex as you can never recover the time spent on cutting the damn stuff which I used a lot in the 70s/80s.
    The intricacy of these designs is quite liberating to me. It might be a problem for me though as I rarely put anything on paper and work evolves at the bench until it’s done. I’ve always shied away from mass production, even casting as I’d be bored and rarely do more than 3 on a theme but never the same. I’d probably be more likely to use it to cut out base shapes as a backdrop for silver work

    I see I attached this to the wrong quote from you but it’s still part of the broader conversation I think
    I can see the validity of using it like that. There are similarities to, say, a giclee print of a watercolour.

    I did try to delete both posts using my phone when out earlier as I was still worried I might cause offence, which is the last thing I would do. I'm rather glad I failed as your reply has been helpful.

    Ian

  10. #10
    Join Date
    Feb 2011
    Location
    Scotland
    Posts
    3,392

    Default

    Quote Originally Posted by Ianfs View Post
    I can see the validity of using it like that. There are similarities to, say, a giclee print of a watercolour.

    I did try to delete both posts using my phone when out earlier as I was still worried I might cause offence, which is the last thing I would do. I'm rather glad I failed as your reply has been helpful.

    Ian
    I think these discussions are always helpful. I’m such an old dinosaur but if a piece of equipment helps speed up some processes while allowing you the time to do the special stuff then now I’m all for cutting a few corners. One day I may even have some things cast! I create so few pieces that create is an important word to me so if I was mass producing I wouldn’t get anything out of making jewellery or using my skills and continuing to learn new ones. The laser cutter at that price sent a flicker of interest but I know it wouldn’t get used often enough to merit the spend and I haven’t got any more space in my wee workshop

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •