Results 1 to 3 of 3

Thread: Using silver clay to coat clay/wire object

  1. #1
    Join Date
    Dec 2020

    Default Using silver clay to coat clay/wire object

    Hi all. I'm new to the forum but have been experimenting with silver clay jewellery for a while. My question is - I'm making a tree sculpture using clay and silver wire and wondered if it would be possible to use silver clay to coat the finished tree. The tree would be about 30cm high with several branches.

  2. #2
    Join Date
    Dec 2009
    Central London


    Hi Sally, and welcome to the forum.
    When exploring an idea possibly not tried before, it's best to experiment with scrap first, or make a separate mock up. Presumably the coating would be in the form of a slurry. Silver wire begins to disintegrate at about 850C.

    If the result is disappointing, you might decide to make the whole thing in silver clay, or explore electro forming:

  3. #3
    Join Date
    Jul 2017


    Is the tree being made with silver clay and silver wire? If so then coating it in silver clay shouldn't be a problem so long as you have a kiln big enough to take the finished item.

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts