Results 1 to 3 of 3

Thread: Hello Friends Retired US Navy Submariner

  1. #1
    Join Date
    Aug 2020
    Posts
    1

    Default Hello Friends Retired US Navy Submariner

    So pleased to have found this forum. I am attempting to make the emblem we wear on our uniforms to indicate we're qualified in Submarines. I am failing miserably.

    I served on 3 Nuclear Attack Submarines. I live in Charleston SC. Always wanted to do sandcasting, but maybe bit off more than I can chew.

    My silver goes everywhere but the mold.

    I'll be asking for lots of advice and appreciate any help. I'm make these for Submarine Veterans of WWII

  2. #2
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    7,990

    Default

    If the emblem is flat and with only minor undercuts, which can be blocked out with wax, then it will be an ideal piece to be replicated by the Delft Clay process.
    There is lots of information about this on line, including videos. https://www.google.com/search?client...t+clay+process
    The silver is melted in a crucible, or scorifier and poured into a funnel shape. A metal tray is needed for safety, but the pouring should be quite controllable.
    Please note that you will need a big torch to keep silver hot enough to pour successfully. Welcome to the forum, Dennis.

  3. #3
    Join Date
    Dec 2014
    Location
    South Australia
    Posts
    1,359

    Default

    I am really late to this reply and (most likely too late) another very effective method is to use the etching process, I have made a few if you have a few pics my help
    Last edited by china; 02-10-2020 at 04:28 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •