-
bench press
![Click image for larger version.
Name: Press1aexp.jpg
Views: 23
Size: 44.6 KB
ID: 12687](https://www.cooksongold.com/forum/attachment.php?s=410e3e3f7dc910f0af34b728d6f0c2db&attachmentid=12687&d=1598956850&thumb=1)
![Click image for larger version.
Name: Press2aexp.jpg
Views: 31
Size: 50.5 KB
ID: 12688](https://www.cooksongold.com/forum/attachment.php?s=410e3e3f7dc910f0af34b728d6f0c2db&attachmentid=12688&d=1598957199&thumb=1)
For anyone interested I have just made a 2 ton bench press for punching out blanks and doming.
For me it saves thrashing about with a heavy brass hammer with the risk of bounce etc.
I must add that I have a degree of arthritis in my hands so this saves my hands a bit.
This unit is small compared with the commercial ones I could find and half the price of the cheapest on ebay. The more expensive ones range from £200 to £2000!
I was lucky in that the aluminium section I already had in stock!
Finally it works a treat!
If anyone is interested I can make a cutting list and a plan but the basic dimensions are 25 cms wide x 45 cms high.
You will need:
1 metre of 50mm x 75mm x 5mm aluminium channel £55.00 ebay
4 x 50cms of M12 threaded rod plus nuts and washers £18.60 Wicks / Homebase etc
1 metre of 15mm copper tube £7.00 Wicks / Homebase etc
Total £80.16
Plus a few kilos of patience and a sense of humour
Need ideally a bench drill, angle grinder with metal cutting discs, flat file, rat tail file, spanners for the nuts. Hand power drill and some drills bits, also for ease a riveter and rivets ,and of course some elastoplasts for cut fingers!
-
That looks fun. Has similarities to the press described in Susan Kingsley's book.
(I went the welded route for mine, admittedly)
-
Yes would have welded but had the aluminium section and I don’t have the gear to weld that.
Sent from my iPad using Tapatalk
-
There's no better feeling than using tools you've made yourself. Hope you have lots of fun. Dennis.
-
I agree with Dennis, also saves a lot of money, I am in the process of building myself a new press.
-
Oh ho, ho. Nobody noticed I didn’t mention the actual hydraulic jack! Again ebay. Great choice. I chose one at £17.00. Still a lot cheaper than commercially available presses.
Sent from my iPad using Tapatalk
-
Picked the jack for mine at a local hydraulicks mob it was cheaper than the same item on Ebay $120, Ebay was $144 ( 20 ton )
-
For jacks, I'd usually suggest Machine Mart (on one of their periodic VAT-free days) but I don't think they go quite that low on price.
-
That's a great press ,looks smart too
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks