Results 1 to 10 of 13

Thread: Turn sterling silver to argentium

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jun 2020
    Posts
    63

    Default Turn sterling silver to argentium

    I have sterling silver .. how can i make a argentium? Is just add fine silver till reach 93,5%? Or have some other process? Thank you in advance guys!

  2. #2
    Join Date
    Jul 2009
    Location
    Romsey
    Posts
    5,256

    Default

    Argentium relies upon germanium in the alloy. It's available, but I've never tried melting it & alloying it - given the anti-tarnish action is mostly down to the formation of germanium oxide I suspect it's something that'll require a vacuum furnace to alloy.

  3. #3
    Join Date
    Jun 2020
    Posts
    63

    Default

    Quote Originally Posted by ps_bond View Post
    Argentium relies upon germanium in the alloy. It's available, but I've never tried melting it & alloying it - given the anti-tarnish action is mostly down to the formation of germanium oxide I suspect it's something that'll require a vacuum furnace to alloy.
    THANK YOU SO MUCH!

    and about fine silver to sterling silver? is just add copper?

  4. #4
    Join Date
    Jul 2009
    Location
    Romsey
    Posts
    5,256

    Default

    A basic sterling alloy is 92.5% fine silver, 7.5% copper - what exactly are you trying to do, given germanium is going to cause you problems?

  5. #5
    Join Date
    Jun 2020
    Posts
    63

    Default

    Quote Originally Posted by ps_bond View Post
    A basic sterling alloy is 92.5% fine silver, 7.5% copper - what exactly are you trying to do, given germanium is going to cause you problems?
    bond.. i bought a spooon to melt.. and it is soo contamitaded... when i heat the silver to anneling .. it create like mini bubbles ok the metal.. so i was thinking in add a fine silver ..how can i purify to be just a sterling? have some way? or no chance ... need bring into fine silver then remake everything? if so i will sell everything and buy argentium ... who looks much better in finish.

  6. #6
    Join Date
    Jul 2009
    Location
    Romsey
    Posts
    5,256

    Default

    Honestly? It depends how you value your time. I'd scrap it and buy known good sheet. Are you sure it's silver and not plated?

  7. #7
    Join Date
    Jun 2020
    Posts
    63

    Default

    Quote Originally Posted by RichardNy View Post
    THANK YOU SO MUCH!

    and about fine silver to sterling silver? is just add copper?
    can i melt down the Argentium grain and make my own sheet and grain thru rolling mill? or it will crack all time? some rule about it?

  8. #8
    Join Date
    Dec 2014
    Location
    South Australia
    Posts
    1,844

    Default

    I melt Argentium scrap and grain all the time, same as any metal really just make sure you keep it annealed when putting it through the mill etc.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •