Results 1 to 7 of 7

Thread: Making “acorns” or little silver spheres.

  1. #1
    Join Date
    Feb 2016
    Location
    East Anglian
    Posts
    638

    Default Making “acorns” or little silver spheres.

    I made some spheres this morning, melting small lengths of silver wire into a hole in a piece of charcoal. In a bit of a daze after a good meal and wine last night I held the torch on the sphere for longer than I usually do. I was delighted that once I used the sphere on a piece I was making and polished it , there appeared to be a ring of copper around the base. I assume that in heating it as long as I did, the copper in the silver separated out....yes? It looks great reflected in the polished surface around it. Just hope I can do this to order.


    Sent from my iPad using Tapatalk

  2. #2
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,845

    Default

    That's a bit of a mystery, because copper and silver do not separate when melting sterling. Could be that you plated the piece by grasping it with steel tweezers? Then when polishing, the mop could not reach into the base of the ball.

    By the way, to get balls all the same size, when melting into into holes in a block, you can use small jump rings rather than wires. Dennis.

  3. #3
    Join Date
    Feb 2016
    Location
    East Anglian
    Posts
    638

    Default

    Thanks Dennis! Mystery solved....looks good anyhow. I cut snippets of waste silver and weighed them using my “Myco” mini scales. 0.4 gram gave a diameter of about 4.4 mm tho not a true sphere, slightly squashed from pole to pole with a convenient flatish South Pole.


    Sent from my iPad using Tapatalk

  4. #4
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,845

    Default

    Ah a drug dealers balance. I used mine for weighing out 5% accelerator for my acrylic glue, but it began to fail after six moths.
    Now I have this Tuff Weigh, intended to weigh gun pellets, for reasons that escape me. Dennis.
    Attached Thumbnails Attached Thumbnails Balance for Tensol 70.jpg  

  5. #5
    Join Date
    Feb 2016
    Location
    East Anglian
    Posts
    638

    Default Making “acorns” or little silver spheres.

    Used purely for weighing bits of silver, I assure you!

    Mine is very unsophisticated and simple, but so far so good.


    Sent from my iPad using Tapatalk
    Last edited by Ruedeleglise; 02-08-2020 at 09:42 PM.

  6. #6
    Join Date
    Feb 2016
    Location
    East Anglian
    Posts
    638

    Default




    Sent from my iPad using Tapatalk

  7. #7
    Join Date
    Dec 2014
    Location
    South Australia
    Posts
    1,844

    Default

    "for reasons that escape me. Dennis", much quicker than counting them.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •