Results 1 to 4 of 4

Thread: how do I imprint a pattern from a piece of wood onto my metal please?

  1. #1
    Join Date
    Sep 2019
    Posts
    26

    Default how do I imprint a pattern from a piece of wood onto my metal please?

    I have a piece of wood and would like to print/press the texture of its surface in some way onto my silver, but I don't want to cast the entire piece piece of wood due to its large size. One suggestion given to me was to use silver clay. Are there any other ways please? Like perhaps making a mould and using wax to pick up the detail and then casting that? And if so, what materials do I need and what technique do I use please? Thank you! I have tried the food grade silicone mould and poured melted Ferris wax (the light pink one that comes in sheets) but the wax forms lots of bubbles.
    Nat

  2. #2
    Join Date
    Dec 2014
    Location
    South Australia
    Posts
    1,858

    Default

    Some pictures may help, to help prevent bubbles forming vibrate the mould as you fill it

  3. #3
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,904

    Default

    You can also press wood into Delft Clay for casting, but if it has not been sealed, it might need to be wet. D
    https://www.cooksongold.com/Jeweller...B&gclsrc=aw.ds Dennis.

  4. #4
    Join Date
    Sep 2019
    Posts
    26

    Default

    Thank you very much Dennis!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •