help with polish start to end as mirror polish.

[RichardNy]

hi. to achieve mirror polish... need follow step by step in the grit? like 200-400-600 can jump to 1000? im about to buy better polish sanding / finish stuff.. and if some one have a set to indicate me... i will be happy... ps. i have buffers, and right now im using a polish cumpound dialux.. but im about to trade to MERARD Luxor polish cumpound...

i need some bristle disk... and some to polish small gaps and holes... please help me / guide me .
thank u all.

[pearlescence]

If you want to get to grips with polishing, get hold of Masterpolisher Stephen Goldsmith's book Polishing and Finishing. Everything you need to know about what brush, what compound

[Dennis]

We're not a school, Richard. We can't teach you everything, only hold your hand when you stumble. Dennis.

[pearlescence]

If you want a school, Stephen also runs classes

[CJ57]

If you want a school, Stephen also runs classes

I think he’s in New York Wendy

[pearlescence]

just the book then

[alastairduncan]

He is on Instagram and YouTube and has useful tips.

https://instagram.com/goldpolisher
https://www.youtube.com/user/TheGoldpolisher

[The Guru]

If you want to get to grips with polishing, get hold of Masterpolisher Stephen Goldsmith's book Polishing and Finishing. Everything you need to know about what brush, what compound

Thanks for the mention about my book Polishing and Finishing for Jewellers and Silversmiths by Stephen M Goldsmith published by Crowood Press.
I use 3 stages in my method and expect the metal to be prepared up to a minimum of 2000 grit the higher the number the better.
So start off with a black bristle brush and I use brushing emery compound and this removes fire stain too, move on to a B mop (cream) with Tripoli or brown bar of choice and then a Reflex Calico mop (white) and use rouge, you can clean between stages in the ultrasonic and the last compound I use is Menzerna 175 for yellow metal or M5 for white metals, this is used with a soft white mop for extra gloss. I do plenty of demonstrations on my Instagram grid.
I have been invited to the USA to teach at Sawtooth and in Miami too.
Good luck

Sent from my CLT-L09 using Tapatalk

[RichardNy]

Thanks for the mention about my book Polishing and Finishing for Jewellers and Silversmiths by Stephen M Goldsmith published by Crowood Press.
I use 3 stages in my method and expect the metal to be prepared up to a minimum of 2000 grit the higher the number the better.
So start off with a black bristle brush and I use brushing emery compound and this removes fire stain too, move on to a B mop (cream) with Tripoli or brown bar of choice and then a Reflex Calico mop (white) and use rouge, you can clean between stages in the ultrasonic and the last compound I use is Menzerna 175 for yellow metal or M5 for white metals, this is used with a soft white mop for extra gloss. I do plenty of demonstrations on my Instagram grid.
I have been invited to the USA to teach at Sawtooth and in Miami too.
Good luck

Sent from my CLT-L09 using Tapatalk

i order yesterday!! and your boook are helping me alot!! !!

[The Guru]

i order yesterday!! and your boook are helping me alot!! !!

Brilliant pleased I could help

Sent from my CLT-L09 using Tapatalk