Have just finished this piece and really struggled with polishing it. Unusually I think the photo despite the magnification, seems to making it look better than it actually is, it's not a great polish. It looks nice but could be better, would like to know if possible any tips for future. I do pretty much all my polishing on my big mops but obviously not possible with this or I'll end up polishing away the bezel and still not getting into the corners of the bezel/flat background.
I had a couple of issues, my solution to prevent fire scale keeps peeling off in places while soldering, have tried mixing thinner and thicker but still seems to do it, don't remember having this problem before certainly not regularly. I've had my argo-tect for a very long time, still loose powder but could this be the problem? So there was quite a bit of fire scale to contend with.
I taped the bezel off and did the side edges with the big mops them used a little mop with the dremel, the small mop didn't produce overly satisfying results. It still didn't get into the edges so then swapped to medium soft bristle attachment and finished polishing with that. It took an awful lot to get it polished and I didn't get the kind of results I get with my big mop. I'm sure there is probably a better way or different attachments I should be using, so any tips would be much appreciated.
Dennis if you see this, I haven't reverted to curb chains, this one was requested
Polishing help please.
Reply With Quote
Bookmarks