Results 1 to 8 of 8

Thread: Silver stamping help!

  1. #1
    Join Date
    May 2020
    Posts
    2

    Default Silver stamping help!

    Hello,

    I am new to working with jewellery
    I purchased some stamping supplies and am finding it is harder than it looks!
    I have some impressart design stamps- two flowers and a palmtree so quite intricate designs. I am using the impressart hammer, bench block and blanks also. Although the stamps have come out fairly well on the aluminum blanks, when I have tried to stamp them onto sterling silver, they are barely showing! I feel like there is something i am doing wrong that must be really obvious but I just can’t work it out. I did think maybe the silver needs to be annealed?
    I have tried to find out online but every video I watch uses the same materials and equipment.
    If anyone could give me some tips that would be great! Much appreciated.

  2. #2
    Join Date
    Dec 2014
    Location
    South Australia
    Posts
    1,858

    Default

    There is no doubt that the impression would be easier to establish if the Silver is annealed, do you you have a torch you can use to do this, heat to a very dull red and allow to cool this will discolour the silver and you will need to Pickle and polish the piece
    what Silver do you have, blanks made for impression art normally are already annealed, maybe you just need to hit the stamp with more force

  3. #3
    Join Date
    May 2020
    Posts
    2

    Default

    Quote Originally Posted by china View Post
    There is no doubt that the impression would be easier to establish if the Silver is annealed, do you you have a torch you can use to do this, heat to a very dull red and allow to cool this will discolour the silver and you will need to Pickle and polish the piece
    what Silver do you have, blanks made for impression art normally are already annealed, maybe you just need to hit the stamp with more force
    Hello,
    Thanks for the reply!
    I am using the sterling silver blanks from Cookson Gold so i did think they were already annealed.
    I am using as much force as possible! I have also used the tilt and tap technique. However, i am just using the bench block straight onto a table- i questioned that maybe it needed a rubber block underneath?

  4. #4
    Join Date
    Dec 2014
    Location
    South Australia
    Posts
    1,858

    Default

    Personally I don't think a rubber block will solve your problem, when you say "bench block" it is steel not timber?
    Interestingly I looked at the Cookson website, some of there blanks they specify fully annealed and some the don't. Do you have the equipment to anneal one and see if it makes a difference
    Last edited by china; 26-05-2020 at 08:05 AM.

  5. #5
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,904

    Default

    Also spend some time on more research, for instance here: https://www.google.com/search?client...w=1343&bih=760

  6. #6
    Join Date
    Nov 2017
    Posts
    951

    Default

    I would add that your table needs to be solid and have no bounce. Stamping requires a dead blow. Any bounce in your surface makes it a lot harder. As far as I know the rubber block just helps it not be so loud.

  7. #7
    Join Date
    Jul 2009
    Location
    West Midlands
    Posts
    1,541

    Default

    We regularly stamp using impressart stamps onto sterling silver and have found an arbor press the best way for us. When we first started the impression was a bit hit and miss, but using the press makes it much more consistent. We spent a lot of trial and error getting just the right amount of hammering for the right effect and it also depended on which letter you struck too. Having said that, it does depend on the stamps you buy.
    Jules

  8. #8
    Join Date
    Dec 2014
    Location
    South Australia
    Posts
    1,858

    Default

    One more point, a nice heavy hammer will also help, at least half a kilo

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •