Results 1 to 10 of 19

Thread: Buying a bench

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Nov 2017
    Posts
    892

    Default Buying a bench

    Hi everybody, it's been a while as it's been a bit tough, had a severe migraine and it's screwed up my eyes. Seeing double currently but have been assured it will wear off. This has made reading and writing rather difficult but I was wanting to ask your thoughts on this bench. I want to have one in a sliding wardrobe in my flat, from the dimensions given it should fit (the width/depth is 475mm, different from the measurements on cookson) Anyone bought this one. I'm left handed but it should be okay I think.

    https://durston.com/product/durston-...llers-benches/

  2. #2
    Join Date
    Dec 2009
    Location
    Central London
    Posts
    8,420

    Default

    Hi Sheena, wishing you a speedy recovery from the migraine.
    The bench will be quite heavy when loaded with tools, so are you planning to leave it in place, or does it have to be taken out?
    You might also consider something much simpler such as this one, and have separate sets of drawers, free standing. The thumbnail below it shows a Durston one, presumably not included, but you could also add a set of metal office drawers. https://www.amazon.co.uk/Durston-Jew...BS5Z1C73TH19F0

    Dennis

  3. #3
    Join Date
    Nov 2017
    Posts
    892

    Default

    Once it's in the wardrobe it'll stay there until I move flat, which won't happen for some years I hope. Sadly I don't have a spare room so putting it in the giant living room wardrobe is my best bet. I've never had a proper jewellers desk so it's a bit of a guess as to what I'd like. Main thing is having a surface with no bounce to work on and somewhere to set up a vice and bench peg.

  4. #4
    Join Date
    Nov 2017
    Posts
    892

    Default Homemade Bench

    I've finally contacted a joiner to ask him about having a bench made. i don't know anything about benches, does anyone have a good resource for them? Is a cut out worth having? Anything I should be aware of when I'm a small woman. Any suggestions would be much appreciated. As it's going to be in a cupboard i'm going to look into insulating the walls to to keep the sound down. I'd love to finally be able to have my drill out permanently and my heavy gauge wire bender screwed to a table so I can actually use it.
    Last edited by Sheen; 26-05-2021 at 09:06 PM.

  5. #5
    Join Date
    Nov 2017
    Posts
    892

    Default

    What do you think about this guy's bench build?
    https://youtu.be/sqny0VgeCfM

  6. #6
    Join Date
    Dec 2014
    Location
    South Australia
    Posts
    1,618

    Default

    The one in the video should be ok, the thing about having it made means you can adjust the size and anything else to suit, the top is important at least 38-40 mm, I use a draw to catch things not a skin.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •