No glue I know of on its own will hold it for more than 30seconds, Sheena. You will need to use some 4.00mm (12-15mm long) tubing and glue it in, then crimp it or use two very thin rivets.
Even then, unless done very well it wont hold for long. You stand a better chance with elastic covered in fabric.
A good glue to use is G-S Hypo Cement, because it sets, flexible and is meant for this.
I have been using Henkel/Loctite 406 for years to make o rings, recently as temporary fix I made a large one to use as belt on my little drill press it has been going strong for months, it is constantly under tension
( the fun part is still to come accurately joining the urethane when it arrives )
This is exactly what I need, as i'm basically making a large o ring. Liked the amazon review that someone posted for it 'Makes broken things not so much.' thanks peter and china. Dennis your solution could be useful for other projects it would give a really modern look to a necklace.
Bookmarks